8 steps · 1 hidden screw · 3 connectors · 2 mm at the crown edge
An Apple Watch Series 8 (45 mm) taken apart in 3D the way it really comes apart: the bands off, the screen warmed, a steel blade only 1.5 mm into the 12 o’clock seam and a pick kept to 2 mm along the crown edge, the screen swung open over the Digital Crown on its two cables, the live battery pried up with plastic and lifted out to uncover its connector’s bracket and its one Y000 screw, and the screen’s two cables drawn out of the connectors on its back. Press play to watch a step, Explode to spread the layers, Reassemble to fit the new parts.
An Apple Watch Series 8 in its 45 mm aluminium case, modelled at Apple’s published 45 × 38 × 10.7 mm, lying face up on a soft anti-static pad. You need an ultra-thin steel opening blade, plastic opening picks marked at 2 and 3 mm, a heat pad or a hair dryer, a Y000 tri-point screwdriver, blunt ESD-safe tweezers, a nylon spudger, a foam block, a new battery and a pre-cut display adhesive gasket (and a new screen if the glass is cracked). Run the battery below 25% first.
Tools: Ultra-thin opening blade, Plastic opening picks, Heat pad, Y000 tri-point screwdriver, Blunt ESD-safe tweezers, Nylon spudger