11 steps · 4 traps to avoid · sliding-caliper guide-pin & wheel-nut torque reference
✓ Verified Tool & Torque Specs · Generic 3D Layout
A generic hatchback’s front brake pads changed in 3D, the way the job really goes: chocked and cracked loose on the ground, lifted at the jacking point and set on an axle stand, the caliper’s two guide-pin bolts out and the caliper hung on a hook, the old pads out and the disc measured, the piston wound back, new clips and pads in with grease only where metal meets metal, everything back to torque and the pedal pumped firm. Press play to watch a step, Explode to spread the corner’s parts, Reassemble for the order it goes back together.
A generic five-door hatchback reversed into the bay on firm, level concrete, its front left pads worn down to their wear tab. The kit: a trolley jack, an axle stand rated for the car, two chocks, a breaker bar with a 19 mm socket, a ratchet with a 13 mm socket, two torque wrenches, a disc micrometer, a piston spreader, brake grease and a brush, a wire hook, a parts tray, and an axle set of new pads with new clips.
Tools: Trolley jack and axle stand, Wheel chocks, Breaker bar, 19 mm socket, Torque wrenches