10 steps · 3 traps · H7 wire spring clip & H11 / 9005 twist-lock reference
✓ Verified Tool & Torque Specs · Generic 3D Layout
A car’s low-beam H7 halogen bulb changed in 3D, the way it is done from the engine bay: lights off and the bulb cool, the dust cap turned off, the connector pulled off by its body, the wire spring clip pressed in, slid sideways and swung open, the old bulb out, the new one in by its base with gloved fingers and its tabs in their notches, the clip, the connector and the cap back, the other side the same way, and both beams checked. Press play to watch a step, Explode to spread a socket’s parts out along the bulb, Reassemble for the order it goes back together.
A generic five-door car in the bay, its left low beam out. The kit: a pair of H7 halogen bulbs of the type and wattage the handbook gives (here 12 V, 55 W), clean nitrile gloves, an alcohol wipe and a lint-free cloth. Switch the lights off and take the key out before anything else: a bulb that has just been lit is far too hot to touch.