10 steps · 3 traps · 14mm thin-wall vs 16mm (5/8") socket & aluminium-head torque reference
✓ Verified Tool & Torque Specs · Generic 3D Layout
A generic four-cylinder’s spark plugs changed in 3D, the way the job really goes on a coil-on-plug engine: a cold engine, the cover off, each connector’s red lock slid back before its clip is pressed, the coils’ 10 mm bolts out and the coils twisted out, the wells blown clean, the old plugs out on a 16 mm socket, the new ones checked with a wire gauge, started by hand and torqued to 27 Nm in the aluminium head, and everything back and locked. Press play to watch a step, Explode to lift the coils and the cover apart, Reassemble for the order it goes back together.
A generic five-door car in the bay on its wheels, handbrake on, its engine cold: wait until it has stood for a few hours. The kit: a set of four spark plugs of the type the handbook gives, a 3/8-inch ratchet with a 10 mm socket for the coil bolts, a 5/8 in (16 mm) spark plug socket with a rubber insert and a 6-inch extension, a 10–60 Nm torque wrench, a wire-type gap gauge, a can of compressed air, and a magnetic tray for the four bolts.
Tools: 3/8-inch ratchet, 16 mm spark plug socket, 6-inch extension, Torque wrench, 10–60 Nm, Wire-type gap gauge