7 steps · 86 × 86 mm · 10.5:1 · cams at half speed · 2 traps to avoid
Illustrative 3D Concept Model — Generic Layout
A petrol engine’s cylinder cut down its middle in 3D: the piston, the valves and the cams through the intake, compression, power and exhaust strokes, the charge drawn in, squeezed, lit and pushed out, and the timing belt that keeps it all in step. Press play to watch a stroke, Explode to spread the parts, Reassemble to put it back together.
One cylinder of a petrol engine of our own design, cut down its middle on a display stand. The piston with its rings and gudgeon pin, the connecting rod, the crankshaft with its counterweight and the flywheel; in the head two valves with their springs, each opened by its own camshaft, a spark plug between them and the injector in the intake port; at the back the toothed belt that turns the camshafts at half the crank’s speed. It works in four strokes, two turns of the crank, for every stroke that makes power.