9 steps · 12 screws · battery lock first · 2 fans held still · 7 heatsink screws
Illustrative 3D Concept Model — Generic Layout
A generic 15.6-inch gaming laptop of our own design opened on the bench in 3D: twelve Phillips screws (two captive), the cover off, the battery plug’s metal lock pushed back 2 mm and the battery unplugged first, a new SSD in the second M.2 slot, both fans blown out with their blades held still, the fans unplugged and the heatsink’s seven numbered screws loosened 7 → 1, the old paste cleaned off, phase-change pads on, the heatsink back 1 → 7, and back together. Press play to watch a step, Explode to spread the layers, Reassemble for the order it all goes back in.
A generic 15.6-inch gaming laptop of our own design, shut down (not asleep), its charger unplugged, lying closed and upside down on a grounded ESD mat. Tools: a Phillips #1 and a Phillips #0 screwdriver, a plastic opening pick, a nylon spudger, ESD-safe tweezers, a can of compressed air, lint-free swabs with 99% isopropyl alcohol, two phase-change thermal pads (or a non-conductive paste) and the new M.2 2280 NVMe SSD. A magnetic tray keeps the screws apart by length.
Tools: Phillips #1 screwdriver, Phillips #0 screwdriver, Nylon spudger and opening pick, ESD-safe tweezers