10 steps · 8 screws · 6 picks · 5 connectors
An iPad (9th generation) with cracked glass, taken apart in 3D the way it really comes apart: heat on each edge, six picks left in their places, 7 and 4 mm round the camera-end corners and only the tip past the front camera, the volume edge left uncut over its two cables, the picks slid over the antennas towards the home button only, the glass opened over its volume edge like a book, the LCD unscrewed and folded over the home button end, the battery isolated, the cables unplugged and the home button moved to the new glass. Press play to watch a step, Explode to spread the layers, Reassemble to fit the new glass.
An iPad (9th generation, 2021) with cracked glass, modelled at Apple’s published size of 250.6 × 174.1 × 7.5 mm, with its new glass waiting face down on the mat. On this iPad the glass and its touch layer, the digitizer, are one part and the LCD under them is another: only the glass is replaced, and the LCD and the home button go back in. You need a heat pad or a hair dryer, a suction cup, six plastic opening picks, a Phillips #00 screwdriver, a nylon spudger, blunt tweezers and a thin plastic card to isolate the battery. Run the battery below 25% first and cover the cracks with overlapping strips of clear packing tape.
Tools: Heat pad, Suction cup, Six plastic opening picks, Phillips #00 screwdriver, Nylon spudger, Blunt ESD-safe tweezers, Battery isolation card