10 steps · 12 screws · 3 ribbon cables · 1 sensor flex to move
An iPhone 14 Pro Max with a cracked screen, taken apart in 3D the way it really comes apart: two P2 screws, heat, a suction cup and a pick kept shallow along the left edge, the screen swung open over that edge like a book, eight cowling screws of three lengths, the battery unplugged first, and the original sensor flex moved from the old screen to the new one before it is tested and sealed. Press play to watch a step, Explode to spread the layers, Reassemble to fit the new screen.
An iPhone 14 Pro Max with a cracked screen, modelled at Apple’s published size, and its new screen beside it. You need P2 pentalobe, Y000 tri-point and Phillips #000 screwdrivers, a heat pad, a suction cup, plastic opening picks, a nylon spudger, ESD tweezers and a foam block to lean the open screen on. Run the battery below 25% first, and cover a cracked screen with clear tape so no glass can flake off.
Tools: P2 pentalobe screwdriver, Y000 tri-point screwdriver, Phillips #000 screwdriver, Heat pad, Suction cup lifter, Plastic opening picks, Nylon spudger, ESD-safe tweezers