9 steps · 5 screws · 2 flex cables · 3,349 mAh battery
An iPhone 15 taken apart in 3D the way it really comes apart for a new battery: from the back. Two P2 screws, heat, a suction cup and a pick round the back glass, the glass swung open to the right on its cable, the battery unplugged before the coil cable, and two stretch-release strips wound out. Press play to watch a step, Explode to spread the layers, Reassemble to fit the new battery and close the phone.
An iPhone 15, the first iPhone with a USB-C port, and one of the first whose back glass comes off on its own: its battery lies right under it, so the screen is left alone. Tools: a P2 pentalobe and a Y000 tri-point screwdriver, a heat pad, a suction cup, thin plastic picks, a nylon spudger, blunt ESD-safe tweezers and a block of foam as high as the phone to rest the open back glass on. Run the battery down below 25% before you start.
Tools: P2 pentalobe screwdriver, Y000 tri-point screwdriver, Heat pad, Suction cup lifter, Plastic opening picks, Nylon spudger, ESD-safe tweezers, Foam block