10 steps · 42 screws · 18 connectors · 2 microphones · 2 traps to avoid
An iPhone 15 taken apart in 3D the way it really comes apart for a new USB-C port: from the back, last of all. First the free fix, lint picked out of the port; then the back glass, the battery unplugged, the screen, both cameras, both speakers, the Taptic Engine, the main microphone, the logic board and the SIM assembly, before the connector’s seven screws. The new one is lined up on a cable. Press play to watch a step, Explode to spread the layers, Reassemble to see every step of the rebuild.
An iPhone 15, whose USB-C connector is a part of its own: a receptacle on a long flex, screwed and glued to the bottom of the frame, with one of the phone’s microphones on it. It is the last part out: the back glass, the screen, both cameras, both speakers, the Taptic Engine, the main microphone, the logic board and the SIM assembly come out before it. Start with the free fix, though: lint packed into the port can stop a cable charging, and it costs nothing to clear.
Tools: Loupe and a nylon or wooden pick, P2 pentalobe screwdriver, Y000 tri-point screwdriver, PH000 crosshead screwdriver, Standoff driver, Heat pad, Suction cup and opening picks, Nylon spudger and ESD-safe tweezers, Two foam blocks