11 steps · 28 screws · 6 battery strips · 49.9 Wh
A MacBook Air (M1, 2020) taken apart in 3D the way it really comes apart for a new battery and trackpad: ten P5 screws of three lengths, two hidden clips, the battery unplugged first, the speakers out, the trackpad cable peeled off the battery, six stretch-release strips pulled out flat, then the trackpad’s nine T5 screws and the laptop opened so the trackpad stays on the screen. Press play to watch a step, Explode to spread the layers, Reassemble to put it back together.
A MacBook Air (M1, 2020), shut down rather than asleep, its charger unplugged and its battery run down, lying closed and upside down on a grounded ESD mat with its hinge away from you. Tools: a P5 pentalobe screwdriver for the bottom case, Torx T3 and T5 screwdrivers for the screws inside, a nylon spudger, blunt ESD-safe tweezers and a suction cup. A magnetic tray keeps the 28 screws apart by length.
Tools: P5 pentalobe screwdriver, Torx T3 screwdriver, Torx T5 screwdriver, Nylon spudger, ESD-safe tweezers, Suction cup