7 steps · 9 screws · 3 ZIF latches · Y00 and Phillips #00
A left Joy-Con with a drifting analog stick, taken apart in 3D down to its stick module: four Y00 tri-point screws, the back opened like a book over the rail without tearing its two ribbons, the battery unplugged, the midframe turned over, three ZIF latches flipped up the way they are made to go, the old stick out and the new one in. Press play to watch a step, Explode to spread the layers, Reassemble to put it back together.
A left Joy-Con, switched off and taken off the console, lies face down on a block of ESD foam with a hole for its stick. Tools: a Y00 tri-point driver for the back, a Phillips #00 driver for the inside, a plastic spudger, an opening pick and ESD tweezers. The new analog stick module waits in its bag on the mat.
Tools: Y00 tri-point driver, Phillips #00 driver, Plastic spudger, Opening pick, ESD tweezers