8 steps · 5 screws · 5 flex cables · 14 solder joints a stick
A PS5 DualSense controller taken apart in 3D to fix stick drift, down to a Hall-effect stick: the black trim freed from its bottom horns first, the screws hidden under L1 and R1, the battery plug pulled straight out by its sides, the five flex cables, and the board folded out to the green potentiometers that drift and the 14 solder joints that hold each stick. Press play to watch a step, Explode to spread the layers, Reassemble to put it back together.
A PS5 DualSense controller (the first version), switched off and unplugged, on an ESD mat. Tools: a plastic spudger, a Phillips #00 screwdriver, ESD-safe tweezers, cotton swabs and isopropyl alcohol (90% or stronger). To replace a stick with a Hall-effect, TMR or standard potentiometer module, add a soldering iron, flux, a desoldering pump and solder wick.
Tools: Plastic spudger, Phillips #00 screwdriver, ESD-safe tweezers