7 steps · 4 fan screws · 3 lengths · spacer 110 → 80
An original PS5 opened in 3D on the bench: the side cover lifted at its corner and slid off, the clipped fan grille, the four T8 security screws in three lengths mapped to their corners, the adhesive wire cover and the fan’s plug, the fan out and cleaned with its blades held still, the dust brushed off the heatsink fins, and an M.2 SSD fitted with its spacer moved from 110 to 80. Press play to watch a step, Explode to spread the layers, Reassemble to put it back together.
An original PS5 with a disc drive (models CFI-1000, 1100 and 1200), shut down fully rather than left in rest mode, unplugged and given time to cool, its base off. It lies on a grounded ESD mat with its PS logo side down and its power button towards you. Tools: a T8 security Torx driver (T8H, also sold as TR8), a Phillips #1, a nylon spudger, ESD-safe tweezers, compressed air and an anti-static brush, and the new M.2 NVMe SSD with its heatsink. A magnetic tray keeps the screws apart by corner.
Tools: Torx T8 security screwdriver, Phillips #1 screwdriver, Nylon spudger, ESD-safe tweezers, Anti-static brush