9 steps · 20 loose screws · 11 captive · 5 loose gears
Illustrative 3D Concept Model — Generic Layout
A robot vacuum built the way the Roomba 500 and 600 series are, taken apart on the bench in 3D: the bin and filter, the side brush on its one loose screw, the brushes and the hair under their end caps, the bottom cover on four captive screws, the battery, a wheel module, the cleaning head’s gearbox opened face up, and the top shell with its bumper harness unplugged first. Press play to watch a step, Explode to spread the parts, Reassemble to put it back together.
A robot vacuum of our own design, built the way the Roomba 500 and 600 series are, off its dock and lying on two ESD foam blocks, its bumper towards the wall. Tools: a Phillips #1 and a Phillips #2 screwdriver, a flat plastic pry tool, ESD tweezers and a magnetic tray. Unplug the dock first, and keep a replacement side brush, filters and brushes to hand.
Tools: Phillips #1 screwdriver, Phillips #2 screwdriver, Flat plastic pry tool, ESD tweezers