8 steps · 16 screws · 6 connectors · SIM tray out first
A Samsung Galaxy S23 opened in 3D to replace its charging port, the way the phone really comes apart: the SIM tray out first, the glued glass back warmed and cut free with only a pick’s tip, the coil’s connector and thirteen 3.5 mm screws, the coil and loudspeaker out together, the battery off before both interconnects, and the sub-board with its USB-C port pried out at its top right corner. Press play to watch a step, Explode to spread the layers, Reassemble to fit the new board and close the phone.
A Samsung Galaxy S23, the base model, opened through its glued glass back to replace its sub-board: the small board along the bottom edge with the USB-C port soldered to it and the SIM card reader on its underside. Tools: the SIM eject tool, a heat pad, a suction cup, plastic opening picks, a Phillips #00 screwdriver, a nylon spudger and ESD-safe tweezers; parts: a new sub-board for your model and a new adhesive for the back. Let the battery run down below 25% before you start.
Tools: SIM eject tool, Heat pad, Suction cup lifter, Plastic opening picks, Phillips #00 screwdriver, Nylon spudger, ESD-safe tweezers