10 steps · 8 screws · 4 ribbon cables · 3,500 mAh battery
Illustrative 3D Concept Model — Generic Layout
A generic flagship phone with a glued OLED screen, taken apart in 3D the way current phones really come apart: two pentalobe screws, heat, a suction cup and a pick, the screen folded open like a book, the battery disconnected first and its three stretch-release strips pulled out. Press play to watch a step, Explode to spread the layers, Reassemble to fit a new battery and seal the screen.
A generic flagship phone of our own design, its screen glued into an aluminium frame as on most phones of the last few years. Tools: a P2 pentalobe and a Y000 tri-point screwdriver, a heat pad, a suction cup, plastic opening picks, a nylon spudger and tweezers. Run the battery down below 25% before you start: a cell damaged by accident is then far less likely to catch fire.
Tools: P2 pentalobe screwdriver, Y000 tri-point screwdriver, Heat pad, Suction cup lifter, Plastic opening picks, Nylon spudger, ESD-safe tweezers