8 steps · 2 traps to avoid · negative off first · BCI Group 35 in 3D
✓ Verified Tool & Torque Specs · Generic 3D Layout
A car’s 12 V battery changed in 3D, in a generic engine bay of our own design: the engine off and the positive cable marked, the negative cable off first and then the positive, the hold-down bar off, the old battery lifted straight up and out, the tray and the clamps cleaned of corrosion, the new battery in and held down snug, then the positive on first and the negative last. Press play to watch a step, Explode to lift the battery, the clamps and the hold-down apart, and Reassemble for the new battery going in.
A generic car of our own design: the corner of its engine bay with a 12 V lead-acid battery, a BCI Group 35 (six cells, posts on top, the negative on the left and the positive on the right of the near side), held down by a steel bar on two hooked rods. Read the car’s owner’s manual first, as VARTA and AAA both advise: it names the battery group and any torque figures, and a few cars need a dealer after the battery has been disconnected.
Tools: Spanner and a socket with ratchet, Battery terminal brush