8 steps · 41:11 ring and pinion · 16 and 10 teeth · work it live · 2 traps to avoid
Illustrative 3D Concept Model — Generic Layout
A rear differential you can see through, in 3D: the pinion and the ring gear, the carrier, the spider gears and the side gears, every tooth meshing, every speed worked out. Press Straight / Corner and watch the wheels share out the carrier’s speed; put one wheel on ice and see why the car stays put.
A generic open rear differential of our own design, its housing see-through, on a display stand, with its half shafts and two wheels at a 1500 mm track. The propeller shaft brings the engine’s turn to an 11-tooth pinion, and the pinion drives a 41-tooth ring gear bolted to the carrier. Inside the carrier a cross pin holds two 10-tooth spider gears, and those mesh with two 16-tooth side gears, one on each half shaft. Steel for the ring and pinion, amber for the spiders, cyan for the side gears, and a cyan mark on each wheel so its turning can be counted. Press Straight / Corner at any moment and work it yourself.