5 steps · 2 traps to avoid · PTFE skates, ZIF ribbon, rotary encoder height & L/R switches
When a Logitech G Pro X Superlight, G Pro Wireless, or Razer Viper / DeathAdder starts scrolling backwards randomly or registering phantom double-clicks, the culprit is a worn mechanical rotary encoder or oxidized primary microswitch. See the complete teardown in 3D: how to warm and peel the bottom PTFE glide skates without creasing them, open the lightweight endoskeleton without ripping the side-button ZIF ribbon, and match the exact encoder millimeter height.
An ultra-lightweight wireless gaming mouse (modeled from the Logitech G Pro X Superlight & Razer Viper / DeathAdder architecture) on an anti-static mat: beneath the bottom PTFE glide skates hide the 4 perimeter #000 Phillips screws; inside the contoured upper shell sit the lightweight internal endoskeleton, the 3.7 V LiPo battery stuck to the carrier, the side-button ZIF ribbon cable, the main PCB with its optical sensor lens, the spoked scroll wheel, the mechanical rotary scroll wheel encoder, and the left and right primary microswitches.
Tools: Warm air / hairdryer & thin plastic pick, Phillips #000 screwdriver, Nylon spudger