7 steps · 2 traps to avoid · InSinkErator’s own unjam and reset · Lift & Latch mount
A garbage disposal that hums but will not turn usually has something stuck in its grinding disk, and its overload protector has cut the motor. On an InSinkErator Badger 5 the whole fix comes in the box: the hex wrench turns the disk free from below, tongs lift the object out, and the red reset button on the bottom brings the motor back. See where each one is, and how its Lift & Latch mount locks and comes off, before you reach under the sink.
A disposer that hums but will not turn, or stops dead, usually has something stuck in its grinding disk, and its overload protector has switched the motor off. InSinkErator’s own fix needs no parts: switch off, turn the disk free from below with the hex wrench that came with it, lift the object out with tongs, let the motor cool and press the red reset button. If it then rattles or leaks at the top, its Lift & Latch mount is checked, and the disposer can be twisted off it.
Tools: Jam-Buster wrench (08305D), Long-handled tongs or pliers, Flashlight, Flat-blade screwdriver