11 steps · 13 screws · 6 flex cables · 2 batteries · 1 cable across the hinge
Apple’s first folding iPhone, taken apart in 3D in the order of Apple’s own repair manual: the back glass half first, its two PL1.1 screws, the glass cut free and tilted up no more than 5° while it is cut, battery 1 unplugged and released with a 9 V battery; then the outer display half the same way for battery 2; then the phone opened flat, its trim lifted and the inner display cut free from the hinge, where one accordion-pleated cable crosses from half to half. Press play to watch a step, Fold / Unfold to work the hinge yourself, Explode to spread the layers, Reassemble to put it back together.
An iPhone Duo lying open on an ESD foam pad, its inner display up: the back glass half on the right, the outer display half on the left, the hinge between them. Apple’s repair manual uses its own heated fixture, repair trays and presses; at home the job needs torque drivers for PL1.1 pentalobe, trilobe and crosshead screws, a heat pad, a new adhesive cutter, a nylon probe (the black stick), a suction cup on a stand and a hand suction cup, blunt ESD-safe tweezers, and a 9 V battery with clip leads to release the batteries’ adhesive. Keep dry sand within reach, as Apple’s battery safety page asks, and wear an ESD wrist strap on a grounded mat.
Tools: PL1.1 pentalobe torque driver, Trilobe torque driver, Crosshead torque driver, Heat pad, Adhesive cutter, Nylon probe (black stick), Suction cup on a stand, Suction cup lifter, ESD-safe tweezers, 9 V battery and clip leads