iPhone Duo hinge and batteriesiPhone DuoiPhone Duo

Steps ↓
✓ Spec-Researched Risk: High 3–5 h
Teardown · step by step iPhone Duo

✓ Spec-Researched 3D Guide

🔴 Overall risk: High ⏱ 3–5 hours (our estimate) 💰 Shop $229
Step0/11
Fold180°
Screws0/13
Flex off0/6
AdhesiveBonded
Step riskHIGH
What you need11 steps · press play

3D Spatial Reconstruction: Models are engineered from factual hardware measurements to visualize internal layouts, screw lengths, and hidden cable traps before you open your device. Always verify cable routing on your specific hardware revision.

iTakeApart.com is an independent platform creating original 3D teardown and repair instructions. We are not affiliated with, endorsed by, or sponsored by Apple, Samsung, Sony, Nintendo, Microsoft, Valve, Dyson, Nespresso, Meta, Ray-Ban, Oura, Tesla, or any other manufacturer or brand mentioned. All product names and trademarks belong to their owners and are used only to identify the devices a guide is for (nominative fair use). Opening a device may void its warranty; you work on it at your own risk.

Embed this 3D guide

Paste it into an article, a blog post or a forum that allows iframes: your readers get the full 3D player (orbit, steps, X-ray, the part to buy) with a link back to this teardown.

Preview ↗

Free for press, blogs, repair forums and classrooms. Embed this interactive 3D guide freely on your site or in your article: just keep the "Interactive 3D by iTakeApart.com" credit badge and its link intact. Commercial, OEM or white-label use needs a partner licence (Terms).

Search nearby repair shops

Opens local search results in Google Maps for your device and a postcode or city. We do not check, rate or recommend the repair shops it shows.

Open Google Maps directly ↗

What you type goes only into the Google Maps search: we do not keep it or send it anywhere.

Before you open itDIY or a repair shop?
Overall repair riskHigh
Time required3–5 hours (our estimate)
What can go wrongTearing the back glass flex past 5°, cutting the crossing cable at the hinge, or folding it shut over a loose screw.
Cost comparison DIY: parts and toolsGet the part ↗Get the kit ↗ Apple: battery service $229Search nearby repair shops ↗Opens local search results in Google Maps Apple’s US out-of-warranty estimates, checked November 2026; inner display $999, cover layer $49. Parts were not yet on sale for DIY.
Fix vs. Replace

Fix it yourself, pay a repair shop, or replace it?

Fault
Your time is worth
Fix it yourselfNo sourced figure
  • PartNo sourced figure
  • Toolsnot priced
  • Time3–5 h
  • 3D risk levelHigh
Repair shop$229

Apple’s own repair service

New or refurbished$1,999

New from Apple: iPhone Duo 256 GB

Consider a Repair ShopThe 3D risk level is High: one slip can cost more than a shop’s fee.Search nearby repair shops ↗Opens local search results in Google Maps

How the verdict works: our own rules of thumb, not statistics. DIY wins when the 3D risk is low or medium and doing it yourself saves over 40% against a replacement (against a shop’s price where buying new does not apply). Replace instead when the device is sealed or potted, or the repair costs over 60% of a replacement. Consider a shop when the risk is high, the job needs soldering or it has a delicate ribbon-cable trap. Your time counts at the rate you pick. Figures are estimates in US dollars, read on makers’ and shops’ own pages in November 2026; they vary by shop and country, and the pages are listed with the guide’s sources. The links open a shop search; we earn nothing from them. Compare other devices in the Fix or Replace? calculator →

Measurements in

11 steps · 13 screws · 6 flex cables · 2 batteries · 1 cable across the hinge

iPhone Duo hinge and batteries: interactive 3D teardown

✓ Spec-Researched 3D Guide

Apple’s first folding iPhone, taken apart in 3D in the order of Apple’s own repair manual: the back glass half first, its two PL1.1 screws, the glass cut free and tilted up no more than 5° while it is cut, battery 1 unplugged and released with a 9 V battery; then the outer display half the same way for battery 2; then the phone opened flat, its trim lifted and the inner display cut free from the hinge, where one accordion-pleated cable crosses from half to half. Press play to watch a step, Fold / Unfold to work the hinge yourself, Explode to spread the layers, Reassemble to put it back together.

What you need

An iPhone Duo lying open on an ESD foam pad, its inner display up: the back glass half on the right, the outer display half on the left, the hinge between them. Apple’s repair manual uses its own heated fixture, repair trays and presses; at home the job needs torque drivers for PL1.1 pentalobe, trilobe and crosshead screws, a heat pad, a new adhesive cutter, a nylon probe (the black stick), a suction cup on a stand and a hand suction cup, blunt ESD-safe tweezers, and a 9 V battery with clip leads to release the batteries’ adhesive. Keep dry sand within reach, as Apple’s battery safety page asks, and wear an ESD wrist strap on a grounded mat.

Tools: PL1.1 pentalobe torque driver, Trilobe torque driver, Crosshead torque driver, Heat pad, Adhesive cutter, Nylon probe (black stick), Suction cup on a stand, Suction cup lifter, ESD-safe tweezers, 9 V battery and clip leads

Before you open it: the risk map

Seen through the open iPhone Duo: the fold zone where nothing hard may lie, the crossing cable in its gap in the hinge, the two flex cables that limit the glass and the outer display to a 5° tilt, both batteries, and the screws by what they hold.

No-pressure, hidden cable, tilt and no-metal zones

Screws by what they hold, and the release points

Press X-Ray & Danger Zones (K) on the player to see them in 3D, through the closed phone.

All 11 steps

  1. 1Power off, unplug and fold it shut trap

    Apple’s first steps: back the phone up, run its batteries right down, take off any case, unplug every cable and power it off. Then look over the open inner display and the hinge for anything lying on them, a screw, a grain of grit, a SIM pin, and close the phone: the back glass half swings up over the hinge and its magnets pull it shut onto the outer display half. It lies on the pad back glass up, its USB-C port towards you, which is how the back glass side is worked. Avoid this trap: The inner display is soft at the surface: a polymer cover layer over thin glass and the folding panel, with the hinge holding the middle up from beneath. Leave a screw, a SIM pin or a grain of grit on it and fold the phone, and the magnet array pulls the halves shut with the hard piece trapped between them, right in the zone by the hinge where owners have reported cracks and bright lines (iFixit lists pressure and a trapped particle among the possible causes; Samsung warns that a coin or key left between its folding screens can scratch or puncture the main one). Open the phone flat on a clean pad, look over the whole inner display and the hinge in a good light, and only then fold it.

  2. 2Remove the back glass’s two PL1.1 screws

    The iPhone Duo has four pentalobe screws at its bottom edge, two in each half, either side of the USB-C port. With the phone shut and back glass up, turn out the two in the back glass half, the upper of the two edges, and lay them in well 1 of the tray. Apple drives the new ones in with its gray torque driver (0.55 kgf·cm) and a PL1.1 bit; any driver of the right bit takes the old ones out.

  3. 3Heat the back glass and cut it free trap

    Soften the back glass’s adhesive: Apple heats the phone for 2 minutes in its heated display removal fixture, back glass up; a heat pad laid on the glass until it is hot to the touch does the same job at home. Cut along the bottom edge first, the adhesive cutter between the glass and the enclosure at 45°, then up both long sides as far as the antenna band. Slide the glass a fraction towards the bottom until a slight gap opens at the top, and cut along the top until the glass is free. All the while the glass stays almost flat: Apple’s limit is 5° at the bottom. Avoid this trap: The back glass is tied to the logic board by one flex cable: JerryRigEverything’s teardown shows it leaving the glass by the camera plateau’s inner end and running down to the board, for the wireless charging coil and the flash that come off with the glass. While the top edge is still stuck, the glass can only tilt about it: lever its bottom edge up to see under it, and the cable is pulled between the glass and its connector. Apple’s caution is exactly this: to avoid damaging the flex cables, the bottom is never tilted up more than 5°. A torn cable leaves the coil and the flash with no way to the board: it is part of the back glass, so that means a new one, and Apple warns that a bad back glass job can leave wireless charging slow or not working. Where and how it tears is our picture. Keep the glass flat, finish the top cut, then tilt it up over its edge by the hinge.

  4. 4Tilt the back glass up and unplug battery 1

    Tilt the back glass up over its edge by the hinge, the right edge seen from the back, which is the edge Apple lines it up by when it plugs it back in, and let the suction cup on its stand take its outer face. Turn out the two trilobe screws of the battery connector cowling into well 2 and lift the cowling off. With the black stick, lever battery 1’s flex cable off its connector first, then the back glass’s: Apple’s order, so the phone cannot switch on while you work. Hold the glass by its edges, release the suction cup and lay the glass face down on the foam.

  5. 5Release battery 1 with 9 V and lift it out

    Peel battery 1’s two silver adhesive tabs up off the battery to 45°. Clip the red (positive) lead to one tab and the black (negative) lead to the bottom speaker’s lower right grounding screw, then put the snap on the 9 V battery and hold it for 90 seconds; move the red clip to the other tab and hold for 90 seconds more. Apple says to start again if a clip comes off, and allows up to 30 V from a DC supply, which is faster. Take the snap off, then the clips, and lift the battery out with a suction cup, as Apple does.

  6. 6Turn it over and remove the outer display’s screws

    Turn the shut phone over onto its back glass side, the camera bump in the pad’s pocket, so the outer display faces up, the USB-C port still towards you. Turn out the other two PL1.1 pentalobe screws, the ones in the outer display half’s bottom edge either side of the port, into well 3.

  7. 7Heat the outer display, cut it free and tilt it up

    Heat the outer display as you heated the back glass. Cut along its bottom, then up both long sides as far as the antenna bands, with a new adhesive cutter held at 45° or more: Apple insists on a new cutter, and a flatter one can damage the display. Slide the display a fraction towards the bottom and cut across the top. Make sure its internal clips have let go, then tilt it up onto the suction cup over its outer edge, the right edge seen from the front, where JerryRigEverything’s teardown shows its flex cable; never more than 5° at the bottom while any of it is still stuck.

  8. 8Unplug battery 2 and take the outer display off

    Pick off the two screw caps on the input/output (I/O) board cowling to find the last two of its six trilobe screws, turn all six out into well 4 and lift the cowling away. Lever battery 2’s flex cable off first, then the outer display’s. Turn out the single crosshead screw of the ambient light sensor cowling by the top speaker into well 5, lift that cowling and the sensor’s flex cable, and the outer display is free: lift it off the suction cup and lay it face down on the foam.

  9. 9Release battery 2 with 9 V and lift it out

    Lift the inner display’s flex cable off its connector on the I/O board, as Apple’s inner display procedure does before the display is heated. Then release battery 2 the way battery 1 was released, with its own points: peel its two black tabs up to 45°, red (positive) on the tab at the top, black (negative) on the top speaker’s lower right grounding screw, 90 seconds; red on the other tab, 90 seconds more. Snap off, clips off, and pull the battery up and to the right with a suction cup, holding the phone.

  10. 10Open it flat and lift off the inner display trim

    Open the phone flat on the pad, inner display up: the outer display half swings back over the hinge. With the black stick, lift the inner display’s trim round its edges, unhook its clips at the hinge, and set both lengths of it aside. Apple’s procedure holds the open phone in its inner display fixture for this.

  11. 11Cut the inner display free and lift it off trap

    Warm the inner display’s adhesive: Apple heats the phone in its heated inner display pocket, back glass up, before setting it in the inner display fixture. Starting at the top right corner, cut round the edges with the cutting tool, shallow. At the hinge, stop, lift the display slightly and cut the hinge’s adhesive under it, then carry on round the edges of the other half. Cover the FaceTime camera with its protective film, move the display’s flex cable to the display side so it cannot be caught, and peel the display off: the hinge is bare, its link chains, its gears and its central support bar, and a little above its middle the one flex cable that crosses from half to half. Avoid this trap: Under the middle of the inner display there is no enclosure, only the hinge: its links, its support bar, and in a gap a little above its middle the one accordion-pleated flex cable that carries the data and one battery’s charge from half to half (iFixit). Push the cutter in deep there to free the adhesive faster and it goes straight past the display into the hinge. Apple’s caution is exactly this: inserting the tool too deep can damage the flex cables and the hinge. Keep the blade shallow, lift the display slightly and cut only the adhesive under it.

What you need

Questions

How many batteries does the iPhone Duo have?

Two, one in each half. iFixit measured the cells at 7.5 and 11.6 Wh, 19.1 Wh in all, both in metal cases, and Apple’s EU energy label gives 4,883 mAh. Apple’s manual treats them as Battery 1, under the back glass, and Battery 2, under the outer display. Battery 1 is the smaller, L-shaped cell (7.5 Wh, 1,921 mAh) and Battery 2 the larger (11.6 Wh, 2,962 mAh), as their labels read in JerryRigEverything’s teardown.

How do you release the iPhone Duo battery adhesive?

With a small voltage, as on the iPhone 16. Each battery has two adhesive tabs: peel both up to 45°, clip a 9 V battery’s red lead to one tab and its black lead to the speaker’s lower right grounding screw (the bottom speaker for battery 1, the top speaker for battery 2), hold 90 seconds, then move red to the other tab for 90 seconds more. Apple allows up to 30 V from a DC supply.

Which side of the iPhone Duo do you open first?

It depends on the part. Battery 1, the logic board and the cameras are under the back glass; battery 2, the I/O board and the USB-C connector are under the outer display; the inner display comes off from the inside once the outer display is out. Each side has two PL1.1 pentalobe screws at the bottom edge, and each glass may be tilted no more than 5° at the bottom while it is being cut.

Is the iPhone Duo’s inner screen made of glass?

Its top layer is not: Apple calls it a nano-textured cover layer of a custom polymer, which it replaces on its own for $49 ($19 with AppleCare+). Under it, high-strength glass sits above and below the folding OLED panel, with adhesives that let the layers slide as it bends, and a titanium plate at the bottom. JerryRigEverything peeled a display apart and found both sheets of glass, with slatted metal mesh layers reinforcing the fold.

What is inside the iPhone Duo hinge?

More than 100 components, Apple says, under a 3D-printed titanium cover, with a magnet array to hold it shut. iFixit found a chain of metal joints that each turn a little, like a watch strap, curved guides, synchronising gears, springs and a central support bar, and one accordion-pleated flex cable crossing through a gap in it. JerryRigEverything’s teardown shows the hinge held between the two halves by about 20 screws, as two modules joined by a thin bar.

Why do some iPhone Duo inner screens crack near the hinge?

Nobody has confirmed it yet. Apple says it is aware of an issue on a small number of units and replaces the inner display assembly. iFixit found the breaks cluster where the hinge’s cable gap meets its central support, and suggests pressure, a trapped particle, repeated bending, a manufacturing fault or a support bar that does not drop far enough as possible causes. JerryRigEverything suspects one hinge component at that same spot, without having opened a phone that failed.

What does an iPhone Duo repair cost at Apple?

Out of warranty in the US, Apple’s estimates in November 2026 were $229 for battery service, $199 for the back glass, $379 for the outer display, $999 for the inner display and $49 for the cover layer; with AppleCare+, battery service was free and the inner display $99.

Is the iPhone Duo dust and water resistant?

Apple rates it IP68, to 6 metres for up to 30 minutes, tested in a laboratory. The hinge is another matter in daily use: iFixit’s dust test left the hinge crunching with powder in its moving parts, and JerryRigEverything’s teardown, after that channel’s own dust test, found grit packed into the hinge and grains pressed into the back of the inner display. Apple’s own hinge advice is to check for particles or dust along the hinge. Keep the phone away from sand and grit.

Safety

Run both batteries right down and power the phone off before you start. Never pry, bend or pierce a battery with metal; release its adhesive again or stop. Keep the 9 V clips on their tab and grounding screw only, and take the 9 V battery off before the clips. Nothing hard on the inner display, nothing sharp near it, and no blade deep at the hinge. If a battery puffs up, hisses or smokes, pour dry sand over it and leave the room.

About this teardown

3D Spatial Reconstruction: Models are engineered from factual hardware measurements to visualize internal layouts, screw lengths, and hidden cable traps before you open your device. Always verify cable routing on your specific hardware revision.

The iPhone Duo is real and on sale: Apple announced it on 9 September 2026 and it went on sale on 23 October, and the brief for this teardown was written before then. The phone here is our own model of it, built to Apple’s published sizes (open 164.6 × 117.8 × 5.2 mm, shut 84.1 × 117.8 × 11.3 mm) with no logo, wordmark or artwork of Apple’s on it. The order of the work, the screws by type and torque, the connectors and the order they come off, the 5° tilt limits, the adhesive release and every caution are from Apple’s iPhone Duo repair manual; the hinge’s gears, joints and support bar, the cells’ sizes and their metal cases, and the cable across the hinge are from iFixit’s teardown; the hinge’s magnets, its titanium cover, the inner display’s layers and the vapor chamber are from Apple’s announcement. Where the parts lie inside each half, the batteries’ shapes and labels, the charging coil and magnets on the back glass and the edge the outer display opens over are from JerryRigEverything’s teardown video, read off its frames.

Where the brief differed, the real phone decided. The inner display’s top layer is not ultra-thin glass: Apple calls it a nano-textured cover layer of a custom polymer, over high-strength glass above and below the folding panel and a titanium plate beneath, and replaces it on its own as a $49 part; JerryRigEverything peeled a display apart and found the two sheets of glass, with slatted metal mesh layers reinforcing the fold. The hinge is synchronised by gears (iFixit), not by cams, which iFixit names as Google’s choice. No source shows dust-sweep brushes, so none are drawn: Apple rates the phone IP68, but iFixit’s dust test found powder reaching the hinge’s moving parts and making it crunch, and JerryRigEverything’s teardown, after that channel’s own dust test, found the hinge packed with grit and grains pressed into the back of the inner display. The cable across the hinge is one accordion-pleated flex in a gap in the hinge (iFixit), a little above its middle in the video, not an S-curve ribbon. The brief’s traps were checked against the manual: the back glass never reaches the hinge cable, so the trap at the back glass is Apple’s own, its flex damaged by tilting past 5°; the hinge cable is at risk when the inner display is cut free, exactly as Apple’s inner display caution says; and pressure at the fold is shown as a loose screw folded into it. Apple heats the displays only in its fixture, for 2 minutes, with no published temperature, and no source describes heat damage at the fold, so no temperature is given and no heat trap shown.

Read off a video, not measured: the places and outlines of the boards, the batteries, the cameras, the speakers, the Taptic Engine and the vapor chamber are taken from JerryRigEverything’s frames against Apple’s outer sizes, good to a millimetre or two. Battery 1, the L-shaped cell under the back glass, is the 7.5 Wh one and battery 2 the 11.6 Wh one: their labels are legible in the video (1,921 and 2,962 mAh, together the 4,883 mAh of Apple’s EU label). Our estimates, not Apple’s figures: where the cowlings, their screws, the connectors under them, the batteries’ adhesive tabs and the closing magnets sit (Apple shows them only in pictures), where along its edges the back glass half’s buttons are, the screws’ lengths (Apple publishes them only in its drawings, so none is given here; the video says only that the two pairs of pentalobe screws differ), the shape of the hinge cover’s section, how the hinge’s links, gears and support bar move, how the inner display bends in the shut phone, and the cable’s route through the hinge. The hinge is drawn with a pair of pivots and four equal gears so the halves always turn by the same angle; Apple’s has more than 100 components, and the video shows it as two modules joined by a thin bar. Apple’s repair uses its heated fixture, repair trays, presses and an inner display fixture; the heat pad, the suction cup on a stand and the foam pad stand in for them, and Apple’s inner display procedure lifts the trim before the outer display comes off, where this teardown takes the batteries out first. The 3D runs faster than real hands do, and shows each 90 seconds of the release in a few.

iFixit gave the Duo a provisional 5 out of 10 for repair, the highest of any folding phone it has scored, taking marks off for the inner display and the hinge. Owners have reported inner display cracks and lines near the hinge; Apple says it is aware of an issue on a small number of units and replaces the inner display assembly. iFixit’s simulation suggests the central support bar may not drop far enough as the phone folds; that is a possible cause, not a confirmed one, and this model does not show it failing. JerryRigEverything’s teardown points at one hinge component at the end of the cable’s gap, under the spot where the lines appear, and says so as a suspicion: it opened no phone that had failed that way.

Sources: Apple: iPhone Duo Repair Manual (the procedures, read first), Apple: iPhone Duo Back Glass (PL1.1 screws, the 45° cut, the antenna band, 5° at the bottom, battery flex first), Apple: iPhone Duo Battery 1 (two silver tabs, the bottom speaker’s grounding screw, 9 V for 90 seconds a tab, up to 30 V), Apple: iPhone Duo Outer Display (a new cutter at 45° or more, the internal clips, six trilobe screws and two caps, the ALS cowling), Apple: iPhone Duo Battery 2 (two black tabs, red on the top tab, the top speaker’s grounding screw, up and to the right), Apple: iPhone Duo Inner Display (the trim and its clips at the hinge, the cut from the top right corner, “inserting the tool too deep can damage the flex cables and the hinge”), Apple: iPhone Duo Cover Layer (never lifted with hard or sharp tools), Apple: iPhone Duo Enclosure (which parts are on which side), Apple: iPhone Duo USB-C Connector (on the outer display side, under the I/O board), Apple: iPhone Duo Internal View, Orderable Parts and Exploded View (which parts are on which side, the logic board’s connectors, the buttons on the back glass side), Apple: iPhone Duo Screws (torque driver colours, never reuse a screw), Apple: Heated Display Removal Fixture operating manual (the 2-minute heat), Apple: First steps before an iPhone repair, Apple: Battery safety (dry sand), Apple: iPhone Duo troubleshooting hinge issues (particles along the hinge), Apple Newsroom: Apple unveils iPhone Duo (the hinge, its magnet array and titanium cover, the inner display’s layers, the vapor chamber, a battery in each half), Apple: iPhone Duo technical specifications (sizes, weight, displays, IP68, MagSafe charging), iFixit: iPhone Duo teardown (two cells, 7.5 and 11.6 Wh, metal cases; the single-layer boards; the gears, joints, springs and support bar; the accordion cable; dust; 5/10), JerryRigEverything: iPhone Duo Teardown, video (where the parts lie in each half; the batteries’ labels, 7.506 Wh / 1,921 mAh and 11.567 Wh / 2,962 mAh; the coil and magnets on the back glass and its one flex cable; the outer display opened over its outer edge; the vapor chamber cut open; the two sheets of glass and the slatted mesh layers in the inner display; about 20 hinge screws; grit in the hinge), MacRumors: iFixit’s iPhone Duo teardown (possible causes of the cracks near the hinge), MacRumors: Apple explains the iPhone Duo’s folding screen layers, MacRumors: the iPhone Duo’s battery capacity on Apple’s EU label (4,883 mAh, matching a leak’s 2,962 and 1,921 mAh cells), AP, via Scripps News: dos and don’ts for folding phones (Samsung on objects between the screens, Google on fingernails and sharp objects), Macworld: the iPhone Duo hinge issue (Apple aware of an inner display issue on a small number of units), 9to5Mac: Apple’s iPhone Duo repair manual and procedures (parts not yet in the Self Service Repair Store, 23 October 2026), Price source: Apple, iPhone Duo out-of-warranty service estimates, battery service $229, back glass $199, outer display $379, inner display $999, cover layer $49 (read in a browser, 4 November 2026, and the same on 10 November), Price: Apple, iPhone Duo 256 GB, $1,999 new (9 November 2026).

The 3D models, drawings and text are our own. Apple, iPhone, MagSafe, Touch ID and Ceramic Shield are trademarks of their owners, named only to say which device this teardown is for; iTakeApart is not affiliated with them.