Gamepad & stick drift tester

Gamepad Tester: Check Your Controller for Stick Drift

Connect a PS5, Xbox, Switch or Steam Deck controller by USB or Bluetooth and press any button on it. The tester shows every button, trigger and stick live, measures how far each stick rests off centre, and opens the 3D repair for your controller.

Controller

No controller yet. Connect one, then press any button on it: a browser shows a controller to a page only after a press.

Sticks

Left stickx 0.00 · y 0.00
Right stickx 0.00 · y 0.00

Roll each stick slowly round its edge: the cyan shape shows how far it reaches all the way round. The dashed rings mark 5% and 10% off centre.

Stick drift test

Put the controller down and take your hands off it, then start: the test reads both sticks at rest for 3 seconds.

Our own rule of thumb, not a standard: under 5% of the stick’s full throw reads as centred, 10% or more as drift.

Buttons & triggers

L2L1R2R1↑←→↓⧉⌂≡L3R3

All axes

    Fix it in 3D

    Each 3D repair opens on an X-ray of the closed controller: the screws, the ribbon cables and the traps to avoid before you start.

    Nothing leaves your browser: the tester reads your controller through the browser’s Gamepad API, stores nothing and sends nothing. It makes no sound.

    Questions

    How do I test a controller for stick drift?

    Connect it and press any button, then put it down and start the drift test with your hands off it. The tester reads both sticks at rest for 3 seconds and shows how far each one rests from the centre, as a share of its full throw.

    What counts as drift here?

    Our own rule of thumb, not a standard: a stick resting less than 5% of its throw off centre reads as centred, 10% or more as drift, and anything between as slightly off centre.

    Why doesn’t my controller show up?

    A browser shows a controller to a page only after one of its buttons is pressed while the page is open. Check that it is plugged in by USB or paired by Bluetooth with this device, then press a button.

    Which controllers does it recognise?

    It tests any controller your browser reports. It names the PS5 DualSense and DualSense Edge, the PS4 DualShock 4, the Xbox Series X|S, Xbox One and Elite controllers, the Switch Joy-Con and Pro Controller, their Switch 2 versions and the Steam Deck from the maker and product numbers the browser gives. Where a browser gives none, as some do for Xbox controllers, pick yours from the list.

    Does it fix drift?

    No, it measures it. Cleaning or replacing the stick fixes it, and the 3D guides show how on the DualSense, the Xbox Series controller, the Joy-Con and the Steam Deck. A Hall-effect or TMR stick reads a magnet instead of rubbing a carbon track.

    Is anything stored or sent?

    No. The page reads the controller in your browser only: nothing is stored and nothing is sent to us or anyone else. It plays no sound, and the vibration test runs only when you press its button.