5 steps · 2 traps to avoid · Official Moen 1222 / 1222B & 104421 specs · HC tab UP & zero twist
When a single-handle Moen tub or shower faucet that turns on by rotating counterclockwise (never pulling out) starts dripping from the spout, turns stiffly, or loses hot water pressure, replacing its Moen 1222 (or 1222B) Posi-Temp pressure-balancing cartridge restores factory sealing without touching soldered pipes inside the wall. Inspect the hidden U-shaped brass retainer clip, 104421 screw-jack puller, loose black oval side grommets, and HC-up alignment in 3D before shutting off the water.
Moen Posi-Temp single-handle tub and shower valves (models 2510, 2520, 2570, 2580, and 2590—the valves whose handle rotates counterclockwise from OFF through cold, warm, and hot rather than pulling out) all take the Moen 1222 (or bulk 1222B) pressure-balancing cartridge. Every genuine 1222 box includes the notched white plastic twisting cap and #141070 silicone grease packet; adding a Moen 104421 screw-jack puller guarantees clean extraction even when hard-water scale has cemented the old cartridge inside the brass bore.
Tools: Moen 104421 cartridge puller, #2 Phillips screwdriver & needle-nose pliers