Moen Posi-Temp 1222 / 1222B Shower Cartridge ReplacementMoen 1222 shower cartridgeMoen Posi-Temp

Steps ↓
✓ Spec-Researched Risk: Med 30–60 min
Teardown · step by step Moen Posi-Temp

✓ Spec-Researched 3D Guide

🟡 Overall risk: Medium ⏱ 30–60 min 💰 DIY $94.68 vs. Shop $100
Step0/5
Water supplyShut off
Brass U-clipSeated
1222 statusWorn / dripping
Step riskLOW
What you need5 steps · press play

3D Spatial Reconstruction: Models are engineered from factual hardware measurements to visualize internal layouts, screw lengths, and hidden cable traps before you open your device. Always verify cable routing on your specific hardware revision.

iTakeApart.com is an independent platform creating original 3D teardown and repair instructions. We are not affiliated with, endorsed by, or sponsored by Apple, Samsung, Sony, Nintendo, Microsoft, Valve, Dyson, Nespresso, Meta, Ray-Ban, Oura, Tesla, or any other manufacturer or brand mentioned. All product names and trademarks belong to their owners and are used only to identify the devices a guide is for (nominative fair use). Opening a device may void its warranty; you work on it at your own risk.

Embed this 3D guide

Paste it into an article, a blog post or a forum that allows iframes: your readers get the full 3D player (orbit, steps, X-ray, the part to buy) with a link back to this teardown.

Preview ↗

Free for press, blogs, repair forums and classrooms. Embed this interactive 3D guide freely on your site or in your article: just keep the "Interactive 3D by iTakeApart.com" credit badge and its link intact. Commercial, OEM or white-label use needs a partner licence (Terms).

Search nearby repair shops

Opens local search results in Google Maps for your device and a postcode or city. We do not check, rate or recommend the repair shops it shows.

Open Google Maps directly ↗

What you type goes only into the Google Maps search: we do not keep it or send it anywhere.

Before you open itDIY or a repair shop?
Overall repair riskMedium
Time required30–60 min
What can go wrongForgetting to shut off water before pulling the brass U-clip, yanking on the stem with pliers instead of using a 104421 puller, or twisting the new 1222 during insertion and peeling off a black oval side grommet.
Cost comparison DIY: Moen 1222 list $94.68 (+ $56.10 104421 puller if seized)Get the part ↗Get the kit ↗ Plumber: $100–$300 ($200–$400 seized · $200–$650 full valve)Search nearby repair shops ↗Opens local search results in Google Maps US prices, checked November 2026: official Moen US list prices ($94.68 for 1222, $56.10 for 104421 puller, $127.36–$154.68 bare 2520/2570 valve), plumber cartridge & full valve replacement ranges from Fixr and This Old House.
Fix vs. Replace

Fix it yourself, pay a repair shop, or replace it?

Fault
Your time is worth
Fix it yourself$113
  • Part$94.68
  • Toolsin the kit
  • Time30 min–1 h
  • 3D risk levelMedium
Repair shop$100–$300

Plumber

New or refurbished$200–$650

New from Fixr: full in-wall shower valve replacement

DIY Wins — Save ~$310Doing it yourself costs 73% less than a replacement, with your time at $25/hr.DIY against a replacement: 73% lessFind the partAmazoneBay

How the verdict works: our own rules of thumb, not statistics. DIY wins when the 3D risk is low or medium and doing it yourself saves over 40% against a replacement (against a shop’s price where buying new does not apply). Replace instead when the device is sealed or potted, or the repair costs over 60% of a replacement. Consider a shop when the risk is high, the job needs soldering or it has a delicate ribbon-cable trap. Your time counts at the rate you pick. Figures are estimates in US dollars, read on makers’ and shops’ own pages in November 2026; they vary by shop and country, and the pages are listed with the guide’s sources. The links open a shop search; we earn nothing from them. Compare other devices in the Fix or Replace? calculator →

Measurements in

5 steps · 2 traps to avoid · Official Moen 1222 / 1222B & 104421 specs · HC tab UP & zero twist

Moen Posi-Temp 1222 / 1222B Shower Cartridge Replacement: interactive 3D teardown

✓ Spec-Researched 3D Guide

When a single-handle Moen tub or shower faucet that turns on by rotating counterclockwise (never pulling out) starts dripping from the spout, turns stiffly, or loses hot water pressure, replacing its Moen 1222 (or 1222B) Posi-Temp pressure-balancing cartridge restores factory sealing without touching soldered pipes inside the wall. Inspect the hidden U-shaped brass retainer clip, 104421 screw-jack puller, loose black oval side grommets, and HC-up alignment in 3D before shutting off the water.

What you need

Moen Posi-Temp single-handle tub and shower valves (models 2510, 2520, 2570, 2580, and 2590—the valves whose handle rotates counterclockwise from OFF through cold, warm, and hot rather than pulling out) all take the Moen 1222 (or bulk 1222B) pressure-balancing cartridge. Every genuine 1222 box includes the notched white plastic twisting cap and #141070 silicone grease packet; adding a Moen 104421 screw-jack puller guarantees clean extraction even when hard-water scale has cemented the old cartridge inside the brass bore.

Tools: Moen 104421 cartridge puller, #2 Phillips screwdriver & needle-nose pliers

Moen Posi-Temp 1222 vs. Moentrol / Chateau 1225 & 1200 Identification

Moen Single-Handle Shower Cartridge & Posi-Temp Valve Reference Table

Confirm your shower is a Posi-Temp before buying: if you rotate the handle counterclockwise from 6 o’clock to turn water on, you need 1222 / 1222B. (If you pull the handle straight out to start flow, you have an older Moentrol/Chateau 1225 or 1200 cartridge instead.)

Part / Valve ModelHow to IdentifyOfficial Moen Part # & List PriceKey Spec / Included ItemsInstall Orientation
Posi-Temp One-Handle Replacement CartridgeWhite polymer body (~102 × 25 mm) with two black oval side grommets & brass D-stem1222 ($94.68 Moen list) / 1222B (bulk pack)Includes white plastic twisting removal cap + #141070 silicone grease packetHC tab UP (12 o’clock) · push straight in · stem flat notch DOWN (OFF)
Moen Screw-Jack Cartridge Puller ToolMachined hex sleeve + center stem screw for mineral-locked cartridges104421 ($56.10 Moen list)Fits Moen 1200, 1222 & 1225 single-handle cartridgesExtracts straight out against valve face with zero pipe torque
Posi-Temp Cartridge Seal & Grommet Repair KitRefreshes intact 1222 body when only outer rubber seals are worn98040 ($15.94 Moen list)2 black oval side grommets + front O-ring + silicone lubeSeat oval grommets flat in side pockets & grease thoroughly
Moen Posi-Temp Standard Brass Valves (2510 / 2520 / 2580)4-port brass body (59 mm CC width, 114 mm plaster ground), no integral stops2520 CC sweat ($127.36) · 2510 IPS ($139.70)±3 °F pressure-balancing · 120 °F (48 °C) 90 limit stopShut off house main water before pulling brass U-clip
Moen Posi-Temp Valves w/ Integral Stops (2570 / 2590)Slotted screwdriver shutoff check stops on left (hot) & right (cold) wings2570 CC w/ stops ($154.68 Moen list)1/4-turn clockwise closes hot & cold right at the shower wallBoth stop slots vertical = closed; horizontal = open

Reversed Hot & Cold Fix (Back-to-Back Showers): Per Moen’s official 1222 service bulletin, if hot comes out first and cold last, do not install HC upside down—keep HC pointing UP and simply rotate the center brass stem 180° (flat notch UP instead of DOWN) before reinstalling the limit stop and handle.

Before you open it: the risk map

Seen through the shower trim and brass Posi-Temp valve: the 19 mm center Phillips handle screw, white 90 temperature limit stop, U-shaped brass retainer clip in its top slot, and the 1222 cartridge with its two black oval side grommets inside the 4-port brass cylinder.

Water pressure, open drain & unglued side grommet zones

Handle fastener (1 × #2 Phillips · 19 mm stainless screw)

Press X-Ray & Danger Zones (K) on the player to see them in 3D, through the closed shower wall & brass valve.

All 5 steps

  1. 1Shut off water, cover the drain & remove handle, 90 limit stop & stop tube

    Shut off the main house water supply (or turn both integral 1/4-turn screwdriver check stops clockwise on Moen 2570 / 2590 valves), rotate the shower handle open to bleed trapped hot and cold pressure, and cover the tub or shower drain with a cloth. Pry off the center decorative cap, back out the #2 Phillips handle screw, pull off the lever handle and black splined adapter, unclip the two-piece white 90 temperature limit stop, and slide the chrome stop tube straight off to expose the brass valve neck.

  2. 2Pull the U-shaped brass retainer clip straight UP out of the valve slot

    Peer behind the escutcheon trim ring at the 12 o’clock top of the brass Posi-Temp valve body to spot the top loop of the U-shaped brass retainer clip. Grip the top loop squarely with needle-nose pliers and pull the clip straight UP out of the brass slot, setting it immediately in the parts tray—you will reuse this exact brass clip on the new 1222 cartridge.

  3. 3Loosen 45° with the white twisting cap or jack straight out with puller 104421 trap

    Fit the notched white plastic twisting cap (packed inside the new 1222 box) onto the two white cartridge ears and turn it ~45° (> 1/4 turn) clockwise and counterclockwise with pliers to break the rubber friction seal, then pull straight out on the brass stem. If mineral deposits hold the shell fast, thread the center screw of a Moen 104421 cartridge puller into the brass stem, seat the puller barrel against the valve face, and tighten the hex nut so jack-screw leverage draws the entire 1222 cartridge straight out. Avoid this trap: The brass D-stem only drives the internal rotor—it does not lock to the outer white plastic casing once scale cements the rubber grommets to the brass bore. Wrenching forward on the stem with locking pliers pulls the brass core right out, leaving the headless plastic shell stuck deep inside the valve and risking a soldered pipe leak behind the tile.

  4. 4Brush scale from the brass bore, flush grit & blot the back pocket dry

    Scrub green mineral crust and hard-water scale from the inside of the brass Posi-Temp cylinder using a nylon brush dipped in white vinegar (never gouge the brass sealing wall with a screwdriver). Crack the water supply open for 2 seconds behind a splash cup to flush loose sediment, shut it off again, and push a rolled paper towel all the way to the rear wall of the bore to blot out standing water.

  5. 5Silicone-grease both oval grommets & push 1222 straight in with HC UP trap

    Open the included Moen #141070 silicone grease packet and coat BOTH black oval side rubber grommets and the front O-ring generously, pressing each oval grommet flat into its side recess. Point the stamped HC tab straight UP (12 o’clock) and push the new 1222 cartridge straight into the brass bore WITHOUT twisting until the white ears sit completely flush with the front valve face and the brass stem notch points DOWN (6 o’clock = OFF). Avoid this trap: DIYers who twist the old cartridge to get it out naturally try twisting the new 1222 to get it in. Because the two black oval side seals are unglued, twisting drags them across the sharp hot/cold brass ports inside the bore—peeling a seal loose, blocking the cartridge 3 mm proud of the clip slot, and causing instant hot/cold cross-bleed or leaks.

What you need

Questions

How do I know if my Moen shower uses a 1222 Posi-Temp cartridge instead of a 1225 or 1200?

Test how the single handle turns the water on: if the handle stays at a fixed depth and rotates counterclockwise from 6 o’clock through cold, warm, and hot, it is a Moen Posi-Temp valve using cartridge 1222 (or bulk 1222B). If you pull the handle straight out toward you to turn the water on and turn left/right for temperature, it uses a 1225 or brass 1200 cartridge.

Which way does HC face on a Moen 1222 Posi-Temp cartridge, and why must I never twist it going in?

The raised HC letters on the white front ear must point straight UP (12 o’clock), and the cartridge must be pushed straight into the greased bore without twisting. Twisting during installation catches the two unglued black oval side grommets on the internal brass water ports and peels them out of their pockets.

Why won’t the U-shaped brass retainer clip drop all the way back into the slot?

Either trapped water at the very back of the closed brass bore is keeping the cartridge 2–3 mm shy of full seating (pull it out and blot the rear wall dry with a rolled paper towel), or one of the black oval side grommets rolled out of its pocket during insertion. Never turn water back on until the brass U-clip slides all the way through both top and bottom slots.

Hot and cold are backwards after installing my new Moen 1222 cartridge—do I have to pull it back out?

No! Leave the cartridge body installed with HC pointing UP and the brass clip seated, remove the handle and limit stop, and simply rotate the brass center stem 180° so its flat notch points UP (12 o’clock) instead of DOWN (6 o’clock) before putting the handle back on.

Safety

Shut off the main house water valve (or both integral check stops) and open the shower handle to bleed hot-water line pressure before pulling the brass retainer clip—an unclipped cartridge under street pressure can blow out and scald you.

About this teardown

3D Spatial Reconstruction: Models are engineered from factual hardware measurements to visualize internal layouts, screw lengths, and hidden cable traps before you open your device. Always verify cable routing on your specific hardware revision.

This 3D repair guide models a Moen Posi-Temp 4-port forged brass pressure-balancing shower valve (`2520` / `2570`, `59 mm` CC body width inside a `114 mm` plaster ground opening with `1/4`-turn integral check stops) and every serviceable component of the Moen `1222` / `1222B` cartridge system.

All steps and specifications follow Moen’s official `INS746J` instruction sheet and Moen Solutions service bulletins: removing the handle, two-piece `90` rotational temperature limit stop (`120 °F / 48 °C`), chrome stop tube, and vertical U-shaped brass retainer clip; breaking the seal `45°` with the included white twisting cap or extracting straight out with puller `104421` ($56.10 Moen list); drying the rear valve pocket; greasing both unglued black oval side grommets with `#141070` silicone lube; and pushing the new `1222` ($94.68 Moen list) straight in without twisting with `HC` pointing up. Plumber cost benchmarks ($100–$300 standard / $200–$400 seized cartridge swap vs. $200–$650 full in-wall valve replacement) come from Fixr and This Old House (checked November 2026).

Sources: Moen Official Instruction Sheet INS746J & Solutions Guide: 1222 Posi-Temp Single-Handle Shower Cartridge Replacement (HC up, silicone grease #141070, push straight without twisting, 120 °F limit stop), Price: Moen US Official Product Page — Moen 1222 One-Handle Posi-Temp Replacement Cartridge, $94.68 list (includes white twisting tool & grease; read 10 November 2026), Price: Moen US Official Product Page — Moen 104421 Cartridge Puller for 1200, 1222 & 1225 Single-Handle Cartridges, $56.10 list (read 10 November 2026), Moen Solutions Guides: Using a 104421 Cartridge Removal Tool, Valve Body Cleaning and Flushing (blot rear bore dry), & Reversing Hot/Cold 180° Stem Rotation, Price: Moen US Posi-Temp Brass Valves & Seal Kit — 2520 CC Valve ($127.36), 2570 CC Valve w/ Stops ($154.68, 2570sp.pdf 59 mm width & ±3 °F spec) & 98040 Repair Kit ($15.94; read 10 November 2026), Price: Fixr Shower Repair Cost Guide — plumber shower cartridge replacement $100–$300 vs. full shower valve replacement $200–$650 (read 10 November 2026), Price: This Old House Shower Cartridge Replacement Cost Guide — professional plumber replacement $200–$400, $300 average (read 10 November 2026).

The 3D models, drawings and text are our own. Moen and Posi-Temp are trademarks of their owners, named only to say which device this teardown is for; iTakeApart is not affiliated with them.