6 steps · 3 traps to avoid · No screws · The charger is the key
An Oral-B iO Series 7, 8 or 9 handle taken apart in 3D to replace its battery: the brush head and the metal neck ring off, the base cap unlocked with the brush’s own charger as a key, the whole inside pushed out of the bottom, and the 49 × 14 mm lithium-ion cell levered out of its two sprung contacts, the new one going in the right way round. Press play to watch a step, Explode to spread the pieces along the handle, Reassemble to put it back together.
The Oral-B iO Series 7, 8 and 9 handle (Type 3758) has no screw to take out. Its base cap is a latch that the brush’s own charger unlocks like a key, and everything inside comes out of the bottom in one piece. The battery is a 49 × 14 mm lithium-ion cell held between two sprung contacts, not soldered. Two seals keep water out: a grey rubber gasket under a clipped metal ring at the neck, and a black seal on the base cap.
Tools: Plastic spudger, Precision tweezers