6 steps · 2.6 mm wall · an 18.5 mAh potted cell · no screws, no seams · 2 traps to avoid
A Samsung Galaxy Ring, opened the only way it can be without destroying it: in 3D. It charges in its case through two coils, then it is seen through its titanium frame and its epoxy, turns to show the flexible board and the three sensor bumps, then the lithium-polymer cell potted along one side under its charging coil, and where a stuck or swollen ring may be cut. Last, every layer spreads apart. Press play to watch a step, Turn 360° or Peel the Layers to work it yourself, Explode to spread the layers, Reassemble to put it back together.
A Samsung Galaxy Ring in size 9 lies flat on a round anti-static foam pad, its clear charging case beside it. It is modelled to the published sizes: 18.9 mm across inside, 24.1 mm outside, 7.0 mm wide and 2.6 mm thick, and 2.7 g. Nothing here is unscrewed or pried: the ring has no screws, no clips and no seam, only a titanium frame filled with cured epoxy, so this guide opens it in 3D only, layer by layer.