9 steps · Flapper · float · fill valve · siphon · 4 traps to avoid
Illustrative 3D Concept Model — Generic Layout
A see-through toilet in 3D, with its water in cyan: the handle and chain lift the flapper, the tank pours through the rim and the jet, the level passes the trapway’s crest and the siphon empties the bowl, with the gurgle at the end. Then the float falls, the fill valve fills the tank and the refill tube tops up the bowl. Press Flush to run it yourself, Explode to spread the tank’s parts, Reassemble to refit them and test.
A close-coupled toilet of our own design, see-through and side-on, with its middle plane facing you. In the tank: the handle and its lever, a chain, the flapper on the flush valve’s seat, the overflow tube, the fill valve with its float ball on an arm, and the refill tube. In the china below: the rim with its holes, a siphon jet at the bottom of the bowl, and the S-shaped trapway. The water is in cyan, and it does the work: there is no pump and no motor. Press Flush to run a whole cycle whenever you like.