8 steps · 45–90 min (our estimate) · J-hook blades & dual-outlet pump · 3 traps to avoid
✓ Verified Tool & Torque Specs · Generic 3D Layout
Wiper blades and a washer pump changed in 3D on our own generic hatchback: the arms lifted upright over a towel, the old J-hook blades released, the new ones clicked home and locked, a dead washer traced to its pump, the pump levered out of its grommet, a new grommet and pump fitted, and the tank refilled and tested. Press play to watch a step, Explode to spread the pump and the blades, Reassemble for the fitting half on its own.
Two display pieces of our own generic hatchback stand in the bay: the front of its body with the windscreen, the cowl and two J-hook wiper arms on beam blades, and its right front corner, the wheel off, with the washer reservoir and its pump behind the wheel arch liner. The blades take no tools, only a towel; the pump takes a trim tool, a spanner for the battery clamp, a clean pan, a new grommet and washer fluid to refill.
Tools: Trim tool (wide flat blade)