5 steps · 2 traps to avoid · Snap-on earpad ring, 40mm/30mm driver baffle, 3.7 V battery & swivel hinge
Whether your Sony WH-1000XM4 or WH-1000XM5 has a snapped swivel hinge yoke or a 3.7 V pouch battery that drains in an hour, every repair starts inside the earcup: unclip the 6-tab snap-on earpad mounting ring, lift the acoustic foam baffle, remove the 4 × 1.7 × 5.0 mm #00 Phillips driver plate screws, and hinge the baffle plate open gently before touching the ZIF ribbon or swivel pivot harness.
The right earcup of a Sony WH-1000XM4 / WH-1000XM5 wireless noise-cancelling headphone on an anti-static mat, earpad side up: under the snap-on earpad mounting ring and acoustic foam baffle sits the angled 40 mm / 30 mm driver plate, the NFC & capacitive touch sensor panel, the 3.7 V lithium-ion pouch battery, and the swivel hinge yoke assembly with the cross-headband wire harness threading through the pivot joint.
Tools: Plastic pry tool / nylon spudger, Phillips #00 screwdriver