Breville Barista Express Gasket, Shower Screen & Burr CleaningBarista Express gasket & burrBarista Express

Steps ↓
✓ Spec-Researched Risk: Low ~20–30 min
Teardown · step by step Barista Expressgasket & burr

✓ Spec-Researched 3D Guide

🟢 Overall risk: Low ⏱ About 20–30 min 💰 DIY $6.95
Step0/7
PluggedYes
ScrewIn
SealOld
GrinderLoaded
Step riskLOW
What you need7 steps · press play

3D Spatial Reconstruction: Models are engineered from factual hardware measurements to visualize internal layouts, screw lengths, and hidden cable traps before you open your device. Always verify cable routing on your specific hardware revision.

iTakeApart.com is an independent platform creating original 3D teardown and repair instructions. We are not affiliated with, endorsed by, or sponsored by Apple, Samsung, Sony, Nintendo, Microsoft, Valve, Dyson, Nespresso, Meta, Ray-Ban, Oura, Tesla, or any other manufacturer or brand mentioned. All product names and trademarks belong to their owners and are used only to identify the devices a guide is for (nominative fair use). Opening a device may void its warranty; you work on it at your own risk.

Embed this 3D guide

Paste it into an article, a blog post or a forum that allows iframes: your readers get the full 3D player (orbit, steps, X-ray, the part to buy) with a link back to this teardown.

Preview ↗

Free for press, blogs, repair forums and classrooms. Embed this interactive 3D guide freely on your site or in your article: just keep the "Interactive 3D by iTakeApart.com" credit badge and its link intact. Commercial, OEM or white-label use needs a partner licence (Terms).

Search nearby repair shops

Opens local search results in Google Maps for your device and a postcode or city. We do not check, rate or recommend the repair shops it shows.

Open Google Maps directly ↗

What you type goes only into the Google Maps search: we do not keep it or send it anywhere.

Before you open itDIY or a repair shop?
Overall repair riskLow
Time requiredAbout 20–30 min
What can go wrongFitting the new seal ribbed side first, putting a washed burr back wet, or rounding a screw socket packed with coffee.
Cost comparison DIY: Breville seal $6.95 · screen $7.95 · screw $4.95 (list prices)Get the part ↗Get the kit ↗ Repair shop: varies by shopSearch nearby repair shops ↗Opens local search results in Google Maps US list prices on Breville’s own store, read November 2026; the upper burrs and the cleaning tablets were out of stock. No repair shop price for this job was found.
Fix vs. Replace

Fix it yourself, pay a repair shop, or replace it?

Fault
Your time is worth
Fix it yourself$16
  • Part$6.95
  • Toolsin the kit
  • Time15–30 min
  • 3D risk levelLow
Repair shopNo sourced figure
New or refurbished$699.95

New from Breville: Breville Barista Express BES870XL

DIY Wins — Save ~$685Doing it yourself costs 98% less than a replacement, with your time at $25/hr.DIY against a replacement: 98% lessFind the partAmazoneBayiFixit

How the verdict works: our own rules of thumb, not statistics. DIY wins when the 3D risk is low or medium and doing it yourself saves over 40% against a replacement (against a shop’s price where buying new does not apply). Replace instead when the device is sealed or potted, or the repair costs over 60% of a replacement. Consider a shop when the risk is high, the job needs soldering or it has a delicate ribbon-cable trap. Your time counts at the rate you pick. Figures are estimates in US dollars, read on makers’ and shops’ own pages in November 2026; they vary by shop and country, and the pages are listed with the guide’s sources. The links open a shop search; we earn nothing from them. Compare other devices in the Fix or Replace? calculator →

Measurements in

7 steps · 2 traps to avoid · Breville’s own owner-level cleaning · BES870XL

Breville Barista Express Gasket, Shower Screen & Burr Cleaning: interactive 3D teardown

✓ Spec-Researched 3D Guide

When espresso starts running out round the portafilter, Breville’s own troubleshooting points to the group head seal. This 3D guide follows Breville’s US instruction book for the Barista Express BES870XL: switch off and unplug, take the shower screen off with the supplied Allen key, fit the new silicone seal the right way up, then lift out the top burr and brush the grinder clean and dry. Press play to watch a step, Explode to spread the parts, Reassemble to put it back together.

What you need

Breville’s own US instruction book for the Barista Express (BES870XL) gives this job to the owner: the shower screen comes off with the Allen key supplied in the box, the silicone seal behind it is swapped by hand, and the top burr lifts out of the grinder to be brushed clean. For any maintenance other than cleaning, Breville says to call Breville Consumer Support.

Tools: Allen key (supplied), Cleaning brush (supplied), Long-nose pliers, Wooden skewer

Breville’s own part numbers and the machines they fit

Breville group head seal, shower screen, screw and upper burr fits

Each pairing below was read on a page that names the part and the machine (Breville US, or Ricambi, an Australian genuine-parts shop). A blank fit means no page read lists it, not that it does not fit.

ModelSeal SP0025526Screen SP0001475Screw SP0001476Upper burr
Barista Express BES870 / BES870XLyes (Ricambi)yes (Breville US)yes (Breville US)SP0001801 before PDC 1926 · SP0027464 from PDC 1926 (Ricambi)
Barista Express Impress BES876yes (Breville US)yes (Breville US)not listedSP0001801 (Breville US)
Barista Pro BES878yes (Breville US)not listednot listedSP0001801, SP0027464 (Breville US)
Barista Touch BES880yes (Ricambi)yes (Breville US)yes (Breville US)SP0001801, SP0027464 (Breville US)
Infuser BES840 / BES840XLyes (Ricambi)yes (Ricambi)not listednot listed

Which upper burr: read the PDC date code on the sticker underneath the machine. Machines built before PDC 1926 (2019, week 26) take SP0001801; machines built from PDC 1926 take SP0027464.

Before you open it: the risk map

Seen through the closed machine: the group head that stays hot after use, with its seal and the shower screen’s one hex screw, the sharp burrs under the hopper, the grinds chute that must stay dry, and the POWER button.

Heat, sharp burrs, moisture and mains

The screw and the two locks

Press X-Ray & Danger Zones (K) on the player to see them in 3D, through the closed machine.

All 7 steps

  1. 1Switch off, unplug, take out the tank, drip tray and portafilter

    Press POWER to switch the machine off, then pull the plug out. Breville’s safeguards say to unplug before cleaning or taking parts off, and to let the machine cool down before moving or cleaning any parts; no cooling time is given, so let it cool fully. Lift the water tank out at the back by its handle and slide the drip tray out, taking care if either is full. Then take the portafilter out of the group head, or the shower screen cannot be reached: here it is hooked into the grinding cradle.

  2. 2Clear the screw head and undo the screen screw with the Allen key

    One screw in its centre holds the shower screen: a hex socket screw for the supplied L-shaped Allen key, not a Phillips. First pick the centre of the screw clean of coffee with a skewer, as Breville’s drawing says, so the key goes fully in. Put the short end of the Allen key into the screw and turn it counter-clockwise to loosen it, gripping again whenever the long end nears the machine, until the screw comes out. Keep it safe: Breville sells it alone (SP0001476), but does not publish its size or length.

  3. 3Lower the shower screen off and note which side faces down

    With the screw out, the stainless steel shower screen comes down off the group head. Breville asks you to note which side of the screen faces down, so that it goes back the same way. Wash it in warm soapy water and dry it thoroughly. Behind it, Breville’s drawing shows the group head’s flat round face with a small threaded boss in its middle, where the screw went in; no part there is named or sold.

  4. 4Pull out the old silicone seal with fingers or long-nose pliers trap

    Breville takes the silicone seal out with your fingers or a pair of long-nose pliers, and names no screwdriver or pick: grip its inner edge and pull it down out of the group head. The new seal goes in flat side first, so its ribbed side faces you, down towards the portafilter; press it home all round. Breville’s troubleshooting traces espresso running out round the edge of the portafilter, and water leaking there, to a seal that needs replacing. Avoid this trap: Turned over, the ribbed side goes up into the group head and the flat side faces the portafilter. What that does is our own picture, as no Breville page describes it: the seal will not grip the basket’s rim as designed, and espresso can run out round the portafilter, which Breville’s troubleshooting traces to the seal.

  5. 5Empty the hopper, run the grinder clear and lift the hopper off

    Breville’s drawings give the order. Turn the hopper towards UNLOCK (anticlockwise seen from above, as drawn) and lift it off; hold it over an airtight container and turn its dial to let the beans out; put it back and lock it; push the portafilter into the grinding cradle, whose switch runs the grinder, until no more grounds come out; then unlock the hopper again and lift it off.

  6. 6Unlock the top burr by its wire handle and lift it out

    Lift the wire handle over the top burr and turn the burr by it from LOCK ▶ to ◁ ALIGN, the marks printed round the grinder’s opening (anticlockwise seen from above, as Breville draws it). Then lift it straight up and out. Breville warns that the grinder burrs are extremely sharp. The number on the burr’s ring is not the grind setting: moving the burr one number only extends the 1–16 range of the grind size dial.

  7. 7Brush the burrs and the grinds chute dry, never with water trap

    With the supplied cleaning brush, brush out the lower burr, the grinds chute and the top burr. Breville cleans them dry: none of the machine’s parts goes in the dishwasher, and its troubleshooting lists water or moisture in the grinder chamber and chute as a cause of no ground coffee coming out, flashing FILTER SIZE lights and too much or too little coffee. The lower burr stays in: taking it out is Breville’s advanced cleaning, for a blockage only. Avoid this trap: Breville cleans the burrs with the brush. A burr rinsed under the tap and dropped back in wet carries water into the chamber and the chute, where it can stop the grounds coming through. If it happens, Breville says to dry the burrs thoroughly, and a hair dryer may be used to blow air into the chamber. Where the water lies in the 3D is our picture.

What you need

Questions

What tool takes the shower screen off a Breville Barista Express?

The L-shaped Allen key that comes with the machine. Clean the centre of the screw with a skewer first, put the short end of the key in and turn it counter-clockwise. When it goes back, start the screw by hand and tighten it only until it is flush with the screen.

Which way does the new group head seal go in?

Flat side first, into the group head, so the ribbed side faces you. Breville takes the old one out with your fingers or a pair of long-nose pliers.

Why does espresso run out around the portafilter?

Breville’s troubleshooting lists grounds on the basket’s rim, a portafilter not fully inserted, too coarse a grind, too little coffee or too light a tamp, a blocked basket, and a silicone seal that needs replacing.

Can I wash the burrs of a Barista Express?

No. Breville cleans them with the supplied brush, and none of the parts goes in the dishwasher. Water or moisture in the grinder chamber and chute can stop ground coffee coming out and make the FILTER SIZE lights flash, so the burrs must be thoroughly dry before they go back.

Which replacement upper burr do I need?

It depends on the PDC date code on the sticker underneath the machine: before PDC 1926 (2019, week 26) it is SP0001801, from PDC 1926 it is SP0027464.

What does the flashing CLEAN/DESCALE light mean?

A flashing light asks for the cleaning cycle, run with the cleaning disc and one cleaning tablet in the 1 CUP filter basket; a steady light asks for a descale instead.

Safety

Breville’s warnings for this job: switch off with POWER and unplug before cleaning or taking parts off, and let the machine cool down first; the grinder burrs are extremely sharp; never immerse the cord, the plug or the machine in water; never run the grinder without the hopper lid, and keep fingers, hair and utensils away from the hopper while it runs; use a grounded 3-prong outlet, never an adapter.

About this teardown

3D Spatial Reconstruction: Models are engineered from factual hardware measurements to visualize internal layouts, screw lengths, and hidden cable traps before you open your device. Always verify cable routing on your specific hardware revision.

The machine is Breville’s Barista Express BES870XL, drawn as a model of our own with no logo or wordmark (the real one carries Breville’s name on its front). Breville gives its size as 15.9 × 13.1 × 12.4 in (W × D × H), but its own drawing shows the machine taller than it is wide, so we read the 405 mm as its height with the hopper and the 316 mm as its width. That reading, and the shapes and places of the group head, the grinder and the parts inside, are our estimates.

Every step follows Breville’s own US instruction book (issue USCM-XJ20 of 2020 and issue USCM-X26 of 2026): the Allen key page for the screen and the seal, and the drawings for cleaning the conical burr grinder. Where the brief we started from differed, the real machine decides: the shower screen’s screw is a hex screw for the supplied Allen key, not a Phillips, and its size and length are not published, so none is shown; no “dispersion block” is named or sold behind the screen, only the flat face with a threaded boss that Breville draws, given no material here; the seal comes out with fingers or long-nose pliers, as Breville says, not a screwdriver or a pick; and the number on the burr’s ring only extends the 1–16 grind range, it is not the grind setting.

The turn directions of the hopper and the top burr are read from Breville’s drawings, whose captions say only unlock and lock; how far each turns is our picture. The seal’s thickness, its outside and inside sizes, the Allen key’s size and the screw’s length are not published: the 3D draws them to fit. Parking the portafilter in the grinding cradle is our choice. What a reversed seal does in the first trap, and where the water lies in the second, are our pictures; the Breville rules behind both are quoted in the traps.

Prices are Breville US list prices read on its own store in November 2026; the upper burrs and the cleaning tablets showed out of stock. No repair shop or technician price for this job was found, so the shop side says it varies. The time and the hours in the Fix vs. Replace card are our own estimates.

Sources: Breville US instruction book, the Barista Express, issue USCM-X26 (2026): safeguards, burr adjustment, cleaning the conical burr grinder, the Allen key and the seal, troubleshooting, Breville US instruction book, the Barista Express, issue USCM-XJ20 (2020): the same sections, the grounded 3-prong outlet, the 1650 W rating, Price: Breville US, the Barista Express BES870XL, $699.95; 15.9 x 13.1 x 12.4 in, 54 mm portafilter, 16 grind settings (read November 2026), Breville AU, the Barista Express: 40.5 x 33.4 x 31.6 cm, 16 grind settings, Price: Breville US, Seal Shower Head 54mm SP0025526, $6.95 list (read November 2026), Price: Breville US, Screen Outer Shower 54mm SP0001475, $7.95 list, fits BES870 (read November 2026), Price: Breville US, Screw Showerhead SP0001476, $4.95 list, fits BES870 (read November 2026), Price: Breville US, Burr Assembly Upper (Pre 1926 PDC) SP0001801, $19.95 list, out of stock (read November 2026), Price: Breville US, Burr Assembly Upper Etzinger (From 1926 PDC) SP0027464, $24.95 list, out of stock (read November 2026), Price: Breville US, Espresso Cleaning Tablets (8) BEC250, $14.95 list, out of stock (read November 2026), Ricambi (Australian genuine parts): seal SP0025526 (replaces SP0001474) and the machines it fits, BES870 and BES870XL among them, Ricambi: shower screen SP0001475 and the BES870 series it fits, Ricambi: upper burr SP0027464 from PDC 1926 (2019 week 26 onwards), the date code on the sticker underneath, Breville US warranty and repairs: out of warranty, an authorised servicer through Breville Consumer Support; no fees given, iFixit community guide on the Barista Express: the burrs brushed, “Do not use water”.

The 3D models, drawings and text are our own. Breville and Barista Express are trademarks of their owners, named only to say which device this teardown is for; iTakeApart is not affiliated with them.