Fix it yourself, pay a repair shop, or replace it?
FaultDirty or clogged engine air filter
- Part$30.25
- Toolsnot priced
- Time5–10 min
- 3D risk levelLow
Garage
How the verdict works: our own rules of thumb, not statistics. DIY wins when the 3D risk is low or medium and doing it yourself saves over 40% against a replacement (against a shop’s price where buying new does not apply). Replace instead when the device is sealed or potted, or the repair costs over 60% of a replacement. Consider a shop when the risk is high, the job needs soldering or it has a delicate ribbon-cable trap. Your time counts at the rate you pick. Figures are estimates in US dollars, read on makers’ and shops’ own pages in November 2026; they vary by shop and country, and the pages are listed with the guide’s sources. The links open a shop search; we earn nothing from them. Compare other devices in the Fix or Replace? calculator →
Measurements in
5 steps · 5–10 min · Exact 1.5L Turbo vs. 2.0L NA vs. Hybrid SKU split · 2 traps to avoid
2016–2026 Honda Civic & CR-V Engine Air Filter Replacement: interactive 3D repair guide
Unlike Honda’s shared cabin filter behind the glovebox, 2016–2026 Civic and CR-V engine air filters split sharply by engine family and generation: 1.5L Turbo engines use a 4-bolt airbox (OEM 17220-5AA-A00 / FRAM #CA12050 on 2016–2021 Civic & 2017–2022 CR-V; OEM 17220-64A-A00 on 2022–2026 Civic & 2023–2026 CR-V), 2.0L naturally aspirated engines use a spring-clip airbox (OEM 17220-5BA-A00 / FRAM #CA12051), and 2.0L Hybrids take dedicated hybrid elements (17220-5K0-A00 or 17220-6MA-J01). Walk through the 1.5L Turbo airbox, MAF harness clip, and perimeter gasket check in 3D first.
What you need
Honda splits 2016–2026 Civic and CR-V engine air filters strictly by powertrain and generation—never mix 1.5L Turbo, 2.0L naturally aspirated, and 2.0L Hybrid elements. In the 3D bay we model the high-volume 1.5L Turbo bolted airbox (OEM 17220-5AA-A00 / FRAM #CA12050 on 2016–2021 Civic & 2017–2022 CR-V; OEM 17220-64A-A00 on 2022–2026 Civic & 2023–2026 CR-V), whose lid is held by four captive 5 × 28 mm 8 mm hex / #2 Phillips washer-bolts (90091-RAA-A00); 2.0L NA models (#CA12051 / 17220-5BA-A00) use tool-free side spring clips and rear hinge teeth instead.
Tools: 8 mm socket or #2 Phillips screwdriver
- Check the under-hood emissions sticker or intake plumbing before ordering: 1.5L Turbo airboxes have four corner bolts, while 2.0L NA airboxes use flip-off metal wire clips.
Exact Engine & Generation Split — Never Mix 1.5T, 2.0L NA & 2.0L Hybrid
2016–2026 Honda Civic & CR-V Engine Air Filter Exact OEM & FRAM Fitment Table
Every SKU below is verified directly against Bernardi Parts Honda OEM catalogs and FRAM’s official Applications & Interchange tables. Pick the row matching your exact model year and engine displacement:
| Vehicle & Model Years | Engine & Trims / Chassis | Airbox Lid Fasteners | Honda OEM Part # (MSRP) | FRAM / Cross-Ref & Size |
|---|---|---|---|---|
Honda Civic (2016–2021) & CR-V (2017–2022) | 1.5L Turbo (FC1/FC3/FK7 incl. Si & all non-Type-R Hatchbacks; RW1/RW2 2017–2019 EX/EX-L/Touring & 2020–2022 all non-hybrids) | 4 × captive 5 × 28 mm bolts (90091-RAA-A00: 8 mm hex or #2 Phillips) | 17220-5AA-A00 ($30.25 MSRP) | FRAM #CA12050 · Purolator A39183 · Wix WA10417 (245 × 144 × 58 mm) |
Honda Civic (2022–2026), CR-V (2023–2026) & Accord (2023–2026) | 1.5L Turbo (FE1/FL1 EX, Touring, EX-L, Sport Touring & 2022–2026 Si; RS3/RS4 CR-V LX/EX/EX-L; CY1 Accord LX/EX/SE) | 4 × captive 5 × 28 mm bolts (8 mm hex or #2 Phillips) | 17220-64A-A00 ($33.47 MSRP) | Genuine Honda 17220-64A-A00 (distinct 11th-Gen / 6th-Gen 1.5T frame; not #CA12050) |
Honda Civic (2016–2026) & HR-V (2023–2026) | 2.0L Naturally Aspirated (FC2/FC4 2016–2021 LX/Sport & 2016–2018 Sedan EX; FE2/FL2 2022–2026 non-hybrid LX/Sport; RZ HR-V) | Tool-free metal spring snap clips on sides + rear plastic hinge teeth | 17220-5BA-A00 ($30.25 MSRP) | FRAM #CA12051 · Purolator A29151 · Wix WA10416 (52.1 mm tall, angled corner) |
Honda CR-V LX (2017–2019) | 2.4L Naturally Aspirated (RW5/RW6 base LX only) | Metal spring snap clips (tool-free) | 17220-5PH-A00 ($30.25 MSRP) | Genuine Honda 17220-5PH-A00 (base 2.4L CR-V LX only) |
Honda CR-V Hybrid (2020–2022) & Accord Hybrid (2014–2020) | 2.0L Atkinson Hybrid (RT6 5th-Gen CR-V Hybrid) | Spring-clip hybrid air cleaner housing | 17220-5K0-A00 ($32.60 MSRP) | Genuine Honda 17220-5K0-A00 |
Honda Civic Hybrid (2025–2026), CR-V Hybrid (2023–2026) & Accord Hybrid (2023–2026) | 2.0L Two-Motor Hybrid (FE4/FL4 Civic Sport/Sport Touring Hybrid; RS5/RS6 CR-V Sport/Sport-L/Sport Touring/TrailSport; CY2 Accord) | Hybrid upper air cleaner clips | 17220-6MA-J01 ($32.62 MSRP) | Genuine Honda 17220-6MA-J01 |
Honda Civic Type R (2017–2021 & 2023–2026) | 2.0L K20C1 Turbo (FK8 2017–2021 vs. FL5 2023–2026) | High-flow bolted Type R airbox | FK8: 17220-5BF-A00 ($49.57) · FL5: 17220-66V-A00 ($49.57) | Genuine Honda Type R high-flow oiled elements |
No matching series found. Clear the filter to view all compatible models.
Quick Visual Check Under the Hood: Look at the top of your black plastic airbox behind the battery—if four 8 mm hex / Phillips bolts hold the corners down, you have a 1.5L Turbo (17220-5AA-A00 through 2021 Civic / 2022 CR-V, or 17220-64A-A00 on 2022+ Civic / 2023+ CR-V). If metal wire clips snap onto the sides, check whether the badge is non-hybrid 2.0L (17220-5BA-A00 / #CA12051) or Hybrid (17220-5K0-A00 / 17220-6MA-J01).
Unbadged 3D Geometry & Nominative Fair Use: All 3D vehicle, engine, and key fob meshes are 100% unbadged original reconstructions. Manufacturer names, model series, chassis codes, and industry part numbers are referenced strictly in text to identify mechanical compatibility and fastener/consumable specifications. Always verify against your vehicle’s owner’s manual.
Before you open it: the risk map
Seen through the upper airbox cover: the 245 × 144 × 58 mm #CA12050 / 17220-5AA-A00 pleated filter resting in its perimeter channel, the four captive 5 × 28 mm corner bolts (90091-RAA-A00), the 5-pin MAF sensor harness clip, and the corrugated turbo intake boot.
MAF harness, rubber turbo boot & perimeter seal zones
- Fragile harness 5-pin MAF sensor & harness stay: unclip loom before hinging lid up
- No sharp bend Corrugated rubber turbo intake boot: hinge gently ~35° so ribs never split
- Clean seal groove Perimeter gasket channel: seat orange lip flat at all 4 corners
Captive airbox bolts (4 × 8 mm hex / #2 Phillips · 5 × 28 mm)
- 8 mm hex / #2 Phillips · 28 mm captive bolt (90091-RAA-A00) ×4
Press X-Ray & Danger Zones (K) on the player to see them in 3D, through the closed upper airbox cover.
All 5 steps
- 1Switch the engine off, prop the hood & inspect the driver-side airbox
Park on level ground with the parking brake set, switch the ignition completely off, and let hot under-hood plumbing cool. Pull the interior hood latch, release the secondary safety catch at the grille, prop the hood securely, and locate the black rectangular air cleaner box directly behind the 12 V battery on the driver side.
- 2Free the MAF wire retainer & back out the 4 captive 8 mm lid bolts trap
Slip the plastic MAF wiring-harness stay off its mounting tab on the rear edge of the upper airbox cover so the 5-pin sensor lead has gentle slack without unplugging the connector itself. Using an 8 mm socket or nut driver (preferable to a Phillips screwdriver so the cross recess never cams out), turn all four captive 5 × 28 mm corner washer-bolts (Honda 90091-RAA-A00) counterclockwise until their threads spin free inside the lid. Avoid this trap: The upper airbox cover only needs to hinge up 6–8 cm (about 35°) for the panel filter to slide straight out. Yanking the lid sharply upward with the MAF harness clip still locked stretches the thin sensor wires, and over-bending the ribbed rubber intake tube cracks its accordion folds—creating an unmetered air leak that triggers a P0171 lean check-engine light.
- 3Hinge the airbox cover up ~35° & lift out the dirty filter element
Lift the left (fender) edge of the upper airbox cover about 7 cm (~35°), letting the flexible corrugated rubber turbo intake hose act as a gentle hinge. Observe how the orange polyurethane perimeter gasket sits flat in the lower housing channel, then lift the dust-loaded #CA12050 / 17220-5AA-A00 filter straight out and set it aside.
- 4Wipe grit and dry leaves from the lower dirty-side airbox basin
Support the raised lid with one hand and wipe the bottom floor of the lower airbox basin with a slightly damp microfiber cloth (or shop vacuum nozzle) to remove sand, insects, and dry leaves drawn in through the front cold-air snorkel. Never brush dust upward into the open underside of the upper lid where the MAF sensor sits.
- 5Seat the new filter gasket flat in the channel & lower the lid flush trap
Compare the new engine-matched filter side-by-side against the old one to verify identical outer dimensions and corner profile (245 × 144 × 58 mm for #CA12050 / 17220-5AA-A00; angled key corner on 2.0L NA #CA12051 / 17220-5BA-A00). Lower the deep pleats into the basin and press the perimeter rubber gasket flat into every corner of the groove, then lower the upper airbox cover squarely until its flange meets the lower rim all the way around. Avoid this trap: Honda’s 2016–2021 1.5T (17220-5AA-A00), 2022–2026 1.5T (17220-64A-A00), 2.0L NA (17220-5BA-A00), and 2.0L Hybrids (17220-5K0-A00 / 17220-6MA-J01) look similar online yet have distinct frame footprints. Even with the right SKU, lowering the lid crookedly rolls the orange lip seal inward at a back corner—leaving an open unfiltered gap into the intake tract.
What you need
- Engine-matched Honda air filter element · 17220-5AA-A00 / #CA12050 (2016–21 Civic & 2017–22 CR-V 1.5T), 17220-64A-A00 (2022+ Civic & 2023+ CR-V 1.5T), 17220-5BA-A00 / #CA12051 (2.0L NA), or 17220-5K0-A00 / 17220-6MA-J01 (Hybrid)
- 8 mm socket / nut driver (or #2 Phillips) · for the 4 captive 5 × 28 mm bolts on 1.5L Turbo airboxes (2.0L NA uses tool-free clips)
- Clean microfiber cloth · to wipe sand and leaves from the lower dirty-side airbox basin
Questions
Does a 2016–2026 Honda Civic 1.5L Turbo take the same engine air filter as the 2.0L or Hybrid?
No—none of the three powertrains share an engine air filter. 2016–2021 Civic 1.5L Turbo & 2017–2022 CR-V 1.5L Turbo use Honda 17220-5AA-A00 (FRAM #CA12050, 4 captive bolts), 2022–2026 Civic 1.5L Turbo & 2023–2026 CR-V 1.5L Turbo use 17220-64A-A00 (4 captive bolts), 2016–2026 Civic 2.0L non-hybrid uses 17220-5BA-A00 (FRAM #CA12051, spring clips), and 2025–2026 Civic Hybrid / 2023–2026 CR-V Hybrid use 17220-6MA-J01.
What size socket fits the 4 bolts on a Honda Civic or CR-V 1.5L Turbo airbox?
Honda uses four captive M5 × 28 mm cross/hex washer-bolts (OEM 90091-RAA-A00) with an 8 mm hex head and a #2 Phillips cross slot. Always prefer an 8 mm socket or nut driver so the Phillips slot cannot strip if the brass insert is stiff.
Do I have to unplug the Mass Air Flow (MAF) sensor electrical connector?
Usually no: unclipping the plastic wiring-harness stay from the back edge of the upper airbox cover gives plenty of cable slack to hinge the lid up ~35° on its flexible rubber intake hose and swap the filter without disturbing the 5-pin MAF plug.
How often should a Honda Civic or CR-V engine air filter be replaced?
Under Honda’s Maintenance Minder system, code Sub-Item 2 triggers air cleaner element service roughly every 15,000–30,000 miles (or sooner at 15,000 miles if driven frequently on dusty or gravel roads); never blow compressed air through Honda’s viscous paper media.
Safety
Switch the ignition off and remove the key fob from the bay before working near the radiator cooling fan or MAF sensor, and let turbo plumbing cool after driving.
- Engine off: switch the engine and the fan off and take the key away before you reach behind the dashboard or under the bonnet.
- Hot parts and fumes: brakes, exhausts and engines stay hot long after a drive, and a running engine fills a closed garage with carbon monoxide: let parts cool, and keep the door open.
About this guide
3D Spatial Reconstruction: models are engineered from factual measurements to show the parts, the fixings and the order of the job before you start. Always check the handbook of your own car.
This 3D repair guide models the driver-side under-hood air cleaner assembly of the 1.5L turbocharged Honda Civic and CR-V (housing 17201-5AA-A00 / 17201-5PA-A00 with four captive 5 × 28 mm washer-bolts 90091-RAA-A00, 5-pin MAF sensor harness retainer, and corrugated turbo intake boot), paired with a complete 2016–2026 engine-by-engine reference table.
All OEM numbers, FRAM cross-references, dimensions, and MSRP figures are verified directly from Bernardi Parts Honda, HondaPartsNow, and FRAM’s official catalog (checked November 2026): 17220-5AA-A00 ($30.25 MSRP / FRAM #CA12050, 245 × 144 × 58 mm), 17220-64A-A00 ($33.47 MSRP for 2022–2026 Civic 1.5T & 2023–2026 CR-V 1.5T), 17220-5BA-A00 ($30.25 MSRP / FRAM #CA12051 for 2016–2026 Civic 2.0L NA & 2023–2026 HR-V), 17220-5PH-A00 ($30.25 MSRP for 2017–2019 CR-V 2.4L LX), 17220-5K0-A00 ($32.60 MSRP for 2020–2022 CR-V Hybrid), 17220-6MA-J01 ($32.62 MSRP for 2023–2026 CR-V/Accord Hybrid & 2025–2026 Civic Hybrid), and 17220-5BF-A00 / 17220-66V-A00 ($49.57 MSRP for FK8 / FL5 Civic Type R).
Sources: Price: Bernardi Parts Honda OEM 17220-5AA-A00 Element Assy., Air Cleaner, $30.25 MSRP (2016–2021 Civic 1.5L Turbo & 2017–2022 CR-V 1.5L Turbo; read 10 November 2026), FRAM Official Catalog: Extra Guard #CA12050 Rigid Panel Air Filter (9.645 × 5.669 × 2.283 in / 245 × 144 × 58 mm; interchanges with Honda 17220-5AA-A00, Purolator A39183, Wix WA10417), Price: Bernardi Parts Honda OEM 17220-64A-A00 Air Filter, $33.47 MSRP (2022–2026 Civic 1.5T & Si, 2023–2026 CR-V 1.5T, 2023–2026 Accord 1.5T; read 11 November 2026), Price: Bernardi Parts Honda OEM 17220-5BA-A00 Element Assy., Air Cleaner, $30.25 MSRP (2016–2026 Civic 2.0L NA & 2023–2026 HR-V; read 10 November 2026), FRAM Official Catalog: Extra Guard #CA12051 Rigid Panel Air Filter (2.050 in / 52.1 mm height; interchanges with Honda 17220-5BA-A00, Purolator A29151, Wix WA10416), Price: Bernardi Parts Honda OEM Hybrid & 2.4L Elements — 17220-6MA-J01 ($32.62 MSRP, 2023–2026 CR-V/Accord Hybrid & 2025–2026 Civic Hybrid), 17220-5K0-A00 ($32.60), 17220-5PH-A00 ($30.25) & 90091-RAA-A00 5×28 Bolt, iFixit Repair Guide: 2018 Honda Civic LX 2.0L Engine Air Filter Replacement (spring clips, rear plastic hinge teeth & angled filter corner orientation), Price: Filterbuy Cabin vs. Engine Air Filter Cost Guide — professional engine air filter replacement $50–$100 at a garage or dealership vs. $15–$30 DIY (read 11 November 2026).
The 3D models, drawings and text are our own. The 3D cabin is an unbadged reconstruction of this vehicle’s own layout, from its maker’s procedure and the sources above, not the maker’s own model or a scan. Honda, Civic, CR-V, Accord, HR-V, Type R, FRAM, Purolator and Wix are trademarks of their respective owners, named strictly in text to indicate mechanical compatibility and fastener/part specifications (nominative fair use); iTakeApart is not affiliated with or endorsed by any vehicle manufacturer.