How a sewing machine makes a lockstitchSewing machine lockstitchSewing machine

Steps ↓
Concept model Risk: Low
How it works · in 3D Sewing machinelockstitch

Illustrative 3D Concept Model — Generic Layout

🟢 Overall risk: Low ⏱ A few minutes to rethread and change a needle 💰 DIY vs. Shop
Step0/9
Stitches3
Hook0°
NeedleAbove
LoopNone
What is inside9 steps · press play

3D Spatial Reconstruction: a generic model of our own design, built from published facts to show how the parts work together. Real ones differ by maker and model: always check your own before you open or adjust it.

iTakeApart.com is an independent platform creating original 3D teardown and repair instructions. We are not affiliated with, endorsed by, or sponsored by Apple, Samsung, Sony, Nintendo, Microsoft, Valve, Dyson, Nespresso, Meta, Ray-Ban, Oura, Tesla, or any other manufacturer or brand mentioned. All product names and trademarks belong to their owners and are used only to identify the devices a guide is for (nominative fair use). Opening a device may void its warranty; you work on it at your own risk.

Embed this 3D guide

Paste it into an article, a blog post or a forum that allows iframes: your readers get the full 3D player (orbit, steps, X-ray, the part to buy) with a link back to this guide.

Preview ↗

Free for press, blogs, repair forums and classrooms. Embed this interactive 3D guide freely on your site or in your article: just keep the "Interactive 3D by iTakeApart.com" credit badge and its link intact. Commercial, OEM or white-label use needs a partner licence (Terms).

Search nearby repair shops

Opens local search results in Google Maps for your device and a postcode or city. We do not check, rate or recommend the repair shops it shows.

Open Google Maps directly ↗

What you type goes only into the Google Maps search: we do not keep it or send it anywhere.

Before you open itCan it be opened at home?
Overall repair riskLow
Time requiredA few minutes to rethread and change a needle
What can go wrongThreading with the foot down, a bent needle left in, or the bobbin in the wrong way round: loops, skipped stitches or a lock out of place.
Cost comparison DIY: a new needle and a fresh threadingGet the part ↗Get the kit ↗ Sewing machine shop: varies by shopSearch nearby repair shops ↗Opens local search results in Google Maps
Fix vs. Replace

Fix it yourself, pay a repair shop, or replace it?

FaultSkipped stitches (bent needle)

Your time is worth
Fix it yourselfNo sourced figure
  • PartNo sourced figure
  • Toolsnone needed
  • TimeNo sourced figure
  • 3D risk levelLow
Repair shopNo sourced figure
New or refurbishedUpkeep: nothing to replace
No verdict: a figure is missingNo sourced price for the part, so no verdict.

How the verdict works: our own rules of thumb, not statistics. DIY wins when the 3D risk is low or medium and doing it yourself saves over 40% against a replacement (against a shop’s price where buying new does not apply). Replace instead when the device is sealed or potted, or the repair costs over 60% of a replacement. Consider a shop when the risk is high, the job needs soldering or it has a delicate ribbon-cable trap. Your time counts at the rate you pick. We found no fair, sourced figure for this yet, so the card gives no verdict it cannot back. The links open a shop search; we earn nothing from them. Compare other devices in the Fix or Replace? calculator →

Measurements in

9 steps · hook at twice the shaft’s speed · loop at 2.2 mm rise · 3 traps to avoid

How a sewing machine makes a lockstitch: interactive 3D guide

Illustrative 3D Concept Model — Generic Layout

A sewing machine’s working parts in see-through 3D: the amber upper thread through the tension discs, the take-up lever and the needle, and the moment nobody can picture, when the hook’s point takes the loop right round the bobbin case and the take-up lever pulls it up, so that the two threads lock in the middle of the cloth. Press Make One Stitch to turn the handwheel yourself.

What is inside

The working parts of a sewing machine of our own design, seen from the end of its head, with the arm and the bed cut off behind the needle. Above the cloth: the spool, the tension discs, the take-up lever, the needle bar and the presser foot. Under it: the throat plate, the feed dogs, and the rotary hook turning round the bobbin case with the bobbin inside. The upper thread is amber, the bobbin thread cyan. Press Make One Stitch to turn the handwheel once yourself, at any step.

Before you open it: the risk map

Seen through the machine before you thread it: the needle and the lever that move, the hook under the plate, the feed dogs, the discs the thread must sit between, and the eyes each thread has to pass.

Where fingers and threads go wrong

Where each thread must go

Press X-Ray & Danger Zones (K) on the player to see them in 3D, through the closed machine.

All 9 steps

  1. 1The thread’s path and the tension discs trap

    From the spool the thread comes down the front of the head and between two tension discs, round a pin, up through the eye of the take-up lever, and down through the guides on the needle clamp into the needle’s long groove and through its eye. Raising the presser foot lets the discs stand apart, so that the thread can seat between them. Lowering the foot closes them on it, and from then on the upper thread has its tension. The bobbin thread has its own tension: a small spring on the bobbin case presses on it. Avoid this trap: With the foot down the discs are pressed together, and a thread drawn down the front of the head cannot get between them: it lies on top, and the upper thread has no tension at all. The machine still sews. The hook carries each loop round the case as usual, but when the take-up lever pulls, it only draws more thread down from the spool, and the loop stays where it is: small loops under the cloth, which can tangle. Stop, raise the foot, and thread the machine again from the top. How the loops lie here is our picture.

  2. 2The needle goes down through the cloth

    The handwheel’s crank drives the needle bar down. Its point goes through both layers of cloth and on through the opening in the throat plate, carrying the thread down with it, and the thread from the last stitch is drawn down through the same new hole behind the needle. Meanwhile the take-up lever comes down, paying out the thread the needle needs. The thread on the way down lies in the long groove on the needle’s front, out of the cloth’s way. The feed dogs are below the plate: the cloth does not move while the needle is in it.

  3. 3The loop forms as the needle starts up

    From the bottom of its stroke the needle rises. The thread in its long groove rises with it, but the thread on the needle’s back is held by the friction of the cloth, so that for a moment it has nowhere to go and stands off behind the needle as a small loop, just above the eye. The scarf, the hollow cut in the needle’s back there, leaves room behind it. Here the needle rises 2.2 mm for this, the figure one machine maker gives for its own timing check: with no loop, there is no stitch.

  4. 4The hook’s point catches the loop trap

    The rotary hook turns twice for every turn of the shaft that drives the needle, so its point passes the needle twice for each time the needle goes up and down: once with a loop there, once with nothing to catch. Timed to the 2.2 mm rise, the point runs through the scarf behind the needle, close enough to brush it, and goes through the loop between the thread and the needle. The thread now hangs on the point: one strand from the eye under it, one strand to the cloth over it. As the hook goes on, the thread slides back along the point to the crotch behind it, and the hook has it. Avoid this trap: Bent away from the hook, the needle carries its eye and its loop out of the point’s reach. The point runs past behind them, the needle rises again with its thread, and the two threads never meet at this hole: a skipped stitch, the upper thread lying across the top. A slight bend is enough, and pulling the cloth while the needle is in it is one way to get one; bent further, a needle can strike the edge of the plate’s opening and break. Change the needle first when a machine skips stitches: it costs little and it is the commonest cause. How far it is bent here is our picture.

  5. 5The hook carries the loop round the bobbin

    The strand to the cloth runs across the front of the bobbin case; the strand from the eye goes through the notch at the top of the case’s flange, right across the back of the case, inside the hook. So as the hook drags the bight round, the loop opens over the whole case, with the bobbin in it, like a ring passed over a reel. The case itself does not turn: a stop finger sits loose in the notch, and the case rides in the hook’s race. The take-up lever comes down fast to pay out all this thread, and the needle, going up, is out of the cloth before the loop reaches the bottom of the case. That is when the feed dogs rise.

  6. 6The take-up lever pulls it tight

    Past the bottom the loop is pulled towards the top, and it slides forward along the point and off it. Now the take-up lever rises, fast, taking back all the thread it paid out. The bight whips round the flange’s edge, slips under the stop finger and off the case, and what was a loop round the case is now a ring round the bobbin thread, which has been inside it from the start. It rises round that thread, up through the throat plate, and draws the bobbin thread up with it into the hole in the cloth. As the lever reaches its top the discs let through just enough new thread for the stitch.

  7. 7The feed dogs move the cloth

    One more whole turn of the handwheel, watching the feed dogs. They go round a flat rectangle: up through their slots while the needle is out of the cloth, pressing the cloth against the foot; along by one stitch length, 2.5 mm here, carrying the cloth with them; down below the plate; and back underneath it for the next stitch. While the needle is in the cloth they are down and the cloth stands still, or the needle would bend.

  8. 8The lock in the middle of the cloth trap

    Two more stitches, then the cloth clears. In each hole the upper thread comes down from the top and goes back up, and the bobbin thread comes up from the bottom and goes back down, and they hook each other like two links of a chain, in the middle of the two layers. Neither thread can be pulled out of the cloth without the other. It takes both tensions to hold the lock there: pull the upper thread harder than the bobbin thread and the lock comes to the top; the other way, to the bottom. Look at it in the Transparent view. Avoid this trap: A bobbin goes in with its thread unwinding the way the machine’s manual shows; here, anticlockwise seen from the opening. Dropped in the other way round, it turns the wrong way and its thread comes off at the wrong angle to the case’s spring, so that the bobbin thread’s tension is wrong, and the thread may even break. The two tensions no longer balance, and the lock leaves the middle of the cloth: here it comes up to the top layer, our picture of one way it goes wrong. Take the bobbin out and drop it in again the right way before you touch the tension dial.

  9. 9The machine taken apart

    Every part lifted out along its own way, the threads left out: the head with its lever and discs, the needle bar and the needle, the presser foot, the cloth with the seam in it, the throat plate and the stop finger, the feed dogs. Forward out of the hook come the race’s retaining plate, the bobbin case and the bobbin. Explode spreads them further.

What is in it

Questions

How does a sewing machine make a stitch with two threads?

The needle takes the upper thread down through the cloth and, starting up, leaves a small loop. The hook’s point goes into that loop and carries it right round the bobbin, which holds the lower thread. The take-up lever then pulls the loop up, and the two threads hook each other in the middle of the cloth.

Is it a shuttle or a rotary hook?

Most modern machines have a rotary hook, a cup that keeps turning the same way, twice for each turn of the needle’s shaft. Older machines had a shuttle: a pointed carrier with the bobbin inside that swung to and fro through the loop. People still say “shuttle” for both. The stitch they make is the same.

Why does the hook turn twice for each stitch?

The first turn carries the loop round the bobbin case. The second is spare: it goes round with no thread on it while the needle comes down again, so that the point is back at the needle at the right moment.

How can the thread go round the bobbin when the bobbin thread is attached?

Because the bobbin thread comes out of the case, and everything below that point goes through the loop: the case, the bobbin and the thread’s far end inside it. The case is not fixed to anything solid: a finger sits loose in a notch, and the thread slips past it. The bobbin thread’s other end is inside the loop’s reach too, so the loop can come off again with nothing to catch on.

Why is my thread looping or tangling under the fabric?

Most often the upper thread is not seated between the tension discs, or misses a guide such as the take-up lever. Raise the presser foot, so that the discs open, and thread the machine again from the top; the fault is above the cloth although it shows below it.

Why does my machine skip stitches?

The hook’s point is missing the loop. Start with a new needle, the right kind for the cloth: a slightly bent needle holds its eye off the point’s path. If a new needle and fresh threading do not cure it, the timing between the needle and the hook may be out, which is a job for a technician.

Why must the presser foot be up when threading?

Raising it opens the tension discs, so that the thread can slip down between them. With the foot down they are shut and the thread stays on top of them, with no tension.

Which way does the bobbin go in?

The way your machine’s manual shows, as the direction differs between machines. Put in wrongly, the bobbin thread’s tension is wrong and the thread may break. In this machine of our own design, it unwinds anticlockwise, seen from the opening.

Why do the feed dogs only move when the needle is up?

A needle in the cloth holds it in place. If the cloth were moved then, the needle would bend, and it could strike the plate and break. So the dogs stay below the plate until the needle is out of the cloth.

Safety

Switch the machine off and unplug it before you change a needle, take off the throat plate or reach into the bobbin area: the foot pedal starts it with a touch. Keep fingers out of the needle’s path and clear of the take-up lever while it runs.

About this guide

3D Spatial Reconstruction: a generic model of our own design, built from published facts to show how the parts work together. Real ones differ by maker and model: always check your own before you open or adjust it.

The machine is a generic one of our own design, not any maker’s, drawn from the end of its head with the arm and the bed cut off, so that everything that moves stands in one picture. Its rotary hook turns on a level axis, towards the viewer; many home machines have the same kind of hook lying flat, under a drop-in bobbin. The needle’s 30 mm stroke, its 38.4 mm length, the 48 mm rod, the sizes of the hook and the case, the 2.5 mm stitch and the 1.4 mm layers of cloth are our own, of the right sort of size; a size 110 needle’s number is its blade’s 1.1 mm. The thread is drawn about twice as thick as a real one, so that it can be seen.

Many people still call this part the shuttle, and the word is older than the mechanism, but most modern machines have a rotary hook: a cup that keeps turning the same way, twice for each turn of the needle’s shaft. The vibrating shuttle of the old machines did the same job another way: the bobbin rode inside a small pointed carrier that swung to and fro through the loop. What makes the lock is the same in both: the whole bobbin passes through the loop of upper thread.

The timing is from the sources below. The hook turns twice for each turn of the shaft (patents US 2,830,550, US 4,924,788 and US 6,047,653); the loop forms as the needle begins to rise (US 4,924,788), and the point should reach the needle where the needle has risen 2.2 mm, about 1 mm above the eye, inside the scarf (Handi Quilter’s timing check for its own long-arm machines: other makers’ figures differ a little, and we use theirs as an example). The loop encircling the case and being drawn off the point by the take-up is as US 6,047,653 and US 2,830,550 describe it. The feed dogs move only with the needle out of the cloth, and the lock lies in the middle of the cloth’s thickness (Wikipedia’s articles).

The thread here is computed, not drawn by eye. The loop’s two strands go where a thread can go: one across the front of the case, one through the notch and across its back, and it passes nothing solid. We count the links between the two threads through the cycle (the Gauss linking number): exactly one more for each stitch. One simplification: inside the needle’s hole, for about 3° of the turn, the two strands of the upper thread slide by each other as the eye comes up. The take-up lever’s movement is worked out from the thread the loop needs at each moment, so it is no real machine’s curve; on a real machine a link or cam makes it, and a small check spring takes up what is left over, which we leave out.

Where the thread passes the stop finger, a real machine’s case rocks a fraction of a millimetre to let it through (US 2,763,226 is one way of doing that); ours simply leaves a gap, drawn bigger than a real one. The shape of the hook’s point, the place of the notch and of the case’s spring are our own simplified design. The traps’ loops, the amount of the bend and where the lock goes with a wrong bobbin are our pictures of failures the sources name.

Sources: Wikipedia: lockstitch (the hook carries the upper thread round the bobbin case, the take-up pulls it back up, the lock in the middle of the material, the earlier shuttle), Wikipedia: sewing machine (vibrating shuttles replaced by rotary ones; the feed dogs’ path; no feed action while the needle is in the material), Wikipedia: sewing machine needle (shank, groove, scarf, eye and point), Brildor: Schmetz universal needles 130/705 H (the number is the needle’s thickness in hundredths of a millimetre; the system most used in home machines), US patent 2,830,550 (lockstitch machines: rotary hooks at twice the angular speed of the main shaft; the take-up draws the loop off the hook point; a cut-away rib lets the loop past), US patent 4,924,788 (the loop forms as the needle begins its upward stroke; two full turns of the looptaker per needle cycle), US patent 6,047,653 (two turns of the hook per needle cycle; the enlarged loop encircles the bobbin case holder; the lever rises fast and pulls the loop off), US patent 2,763,226 (a bobbin case opener: a gap made for the thread at the case’s stop), Handi Quilter: does my machine need to be timed? (a 2.2 mm needle bar rise, the hook point at the far edge of the needle inside the scarf, 1 mm from the point to the top of the eye; “no loop, no stitch”), The Sewing Machine Newsletter, C. Schoenberg: why raise the presser foot before threading (foot up, discs open; foot down, the thread rests on top of them with no tension: loops under the fabric), The Sewing Machine Newsletter, C. Schoenberg: troubleshooting 101 (a bent needle is the top cause of skipped stitches; a bend front or back acts like a wrong needle-to-hook clearance; a missed loop is a skipped stitch), bernette b05 manual, troubleshooting (skipped stitches: needle blunt or bent, replace it), NMSU Extension circular C-202 (a pulled cloth can bend the needle so that it strikes the back of the needle hole), Brother operation manual: upper threading (raise the presser foot before threading) and list of symptoms (thread tangled on the wrong side of the fabric: upper threading incorrect), Brother operation manual: installing the bobbin (set so that the thread unwinds to the left; otherwise the thread may break or its tension will be incorrect).

The 3D models, drawings and text are our own. The device shown is a generic one of our own design, not any one maker’s model.