Fix it yourself, pay a repair shop, or replace it?
FaultClogged cabin air filter
- Part$17.13
- Toolsnot priced
- Time10–15 min
- 3D risk levelLow
Garage
How the verdict works: our own rules of thumb, not statistics. DIY wins when the 3D risk is low or medium and doing it yourself saves over 40% against a replacement (against a shop’s price where buying new does not apply). Replace instead when the device is sealed or potted, or the repair costs over 60% of a replacement. Consider a shop when the risk is high, the job needs soldering or it has a delicate ribbon-cable trap. Your time counts at the rate you pick. Figures are estimates in US dollars, read on makers’ and shops’ own pages in November 2026; they vary by shop and country, and the pages are listed with the guide’s sources. The links open a shop search; we earn nothing from them. Compare other devices in the Fix or Replace? calculator →
Measurements in
6 steps · 7mm socket wrench · 2015–2025 Ford F-150 / Super Duty · Part #FP-79 / #CF12150
2015–2025 Ford F-150 Cabin Air Filter Replacement (7mm Socket & Trim Bezel): interactive 3D repair guide
On the 2015–2025 Ford F-150 (13th & 14th Gen—America’s #1 selling vehicle—plus 2017–2025 F-250/F-350 Super Duty and 2018–2025 Expedition), the cabin air filter (#FP-79 / #CF12150) cannot be reached by dropping the lower glovebox alone: you must first lift the rubber mat in the upper dash tray, remove two hidden 7mm hex screws, and pull off the passenger dash trim bezel.
What you need
Unlike compact cars that need zero tools, replacing the cabin air filter on a 2015–2025 Ford F-150 (13th & 14th Gen, as well as 2017–2025 F-250/F-350 Super Duty and 2018–2025 Ford Expedition / Lincoln Navigator) requires a 7mm socket wrench! The honeycomb filter access door sits high behind an upper dash wood/metallic trim bezel held by two 7mm hex screws hidden beneath the upper dash rubber mat.
Tools: 7mm socket wrench / nut driver, Plastic trim pry tool
- Before 2015, Ford F-150 trucks (2009–2014 12th Gen) did not have a serviceable cabin air filter at all. Every 2015–2025 F-150 has one behind the upper trim bezel and lower glovebox (#FP-79 / #CF12150).
Exact Ford Truck & SUV Fitment & Part Numbers
Compatible Ford & Lincoln Trucks/SUVs Using Filter #FP-79 / #CF12150 (FL3Z-19N619-A)
All 2015–2025 Ford trucks and full-size SUVs built on the T3 aluminum-body platform share this 7mm bezel bolt + honeycomb filter door architecture:
| Vehicle & Years | Generation / Trim Notes | Fasteners & Access Procedure | Exact Filter Part # (Motorcraft / FRAM / OEM) | Arrow Direction |
|---|---|---|---|---|
| Ford F-150 (2015–2020) | 13th Gen P552 (XL, XLT, Lariat, King Ranch, Platinum, Raptor) | Lift upper rubber mat → remove 2× 7mm hex screws → pop wood/plastic trim bezel → drop glovebox → unclip honeycomb door | Motorcraft #FP-79 / #FP-92 · FRAM #CF12150 · OEM FL3Z-19N619-A | ↓ AIR FLOW points DOWN |
| Ford F-150 & F-150 Lightning (2021–2025) | 14th Gen P702 (incl. PowerBoost Hybrid, Tremor, Raptor & Lightning EV) | Upper glovebox / trim bezel 7mm fasteners + lower glovebox drop + honeycomb filter door | Motorcraft #FP-79 / #FP-92 · FRAM #CF12150 · Bosch P3969WS | ↓ AIR FLOW points DOWN |
| Ford F-250, F-350 & F-450 Super Duty (2017–2025) | 4th & 5th Gen P558 / P708 (shares F-150 aluminum cab) | Identical to F-150: upper rubber mat + 2× 7mm hex screws + trim bezel + honeycomb door | Motorcraft #FP-79 / #FP-92 · FRAM #CF12150 · OEM FL3Z-19N619-A | ↓ AIR FLOW points DOWN |
| Ford Expedition (2018–2025) & Lincoln Navigator (2018–2025) | 4th Gen U553 / U554 | Upper glovebox / trim access + lower glovebox drop + honeycomb filter door | Motorcraft #FP-79 / #FP-92 · FRAM #CF12150 · OEM FL3Z-19N619-A | ↓ AIR FLOW points DOWN |
No matching series found. Clear the filter to view all compatible models.
Do 2009–2014 Ford F-150 Trucks Have a Cabin Air Filter? No—12th-generation (2009–2014) F-150 trucks were built without a cabin air filter slot. Ford introduced the serviceable behind-the-glovebox honeycomb filter door (#FP-79 / #CF12150) starting with the 2015 model year.
Unbadged 3D Geometry & Nominative Fair Use: All 3D vehicle, engine, and key fob meshes are 100% unbadged original reconstructions. Manufacturer names, model series, chassis codes, and industry part numbers are referenced strictly in text to identify mechanical compatibility and fastener/consumable specifications. Always verify against your vehicle’s owner’s manual.
Before you open it: the risk map
X-ray view of the 2015–2025 Ford F-150 passenger dash: the two hidden 7mm hex screws beneath the upper rubber mat, the spring-clipped passenger trim bezel, the right-side glovebox damper, and the honeycomb-grid filter door.
Hidden 7mm fasteners & no-pry zones
- No pry Passenger airbag above upper dash tray
- Remove 2× 7mm bolts first Wood/metallic trim bezel: unscrew 2× 7mm bolts under rubber mat before pulling
- Unhook tether Right glovebox damper tether: unhook before dropping bin
- No debris Blower wheel under filter slot
7mm bolts, trim clips & honeycomb door latches
- 7mm hex screw (under rubber mat) ×2
- ↓ AIR FLOW mark
- Glovebox side stop ×2
- Honeycomb door latch ×2
Press X-Ray & Danger Zones (K) on the player to see them in 3D, through the closed car.
All 6 steps
- 1Open glovebox, empty manual & lift out the upper rubber dash mat
Switch the ignition off and open the front passenger door wide. Open the lower glovebox and place the owner’s manual on the seat. Then reach into the open storage shelf directly above the glovebox and peel up the textured black rubber dash mat tray—exposing two 7mm hex washer-head screws along the front edge.
- 2Remove the two 7mm hex screws & unhook the right damper tether trap
Use a 7mm socket wrench or nut driver to remove the two 7mm hex screws securing the top of the passenger dash trim bezel (keep a magnetic tip or fingers on the screws so they do not drop into the defroster duct!). Then unhook the right-side damping tether from the side wall of the lower glovebox. Avoid this trap: If you try to pry the F-150 passenger dash trim bezel off without removing the two 7mm hex screws hidden under the rubber mat—or force the glovebox down with the side damper still hooked—you will snap the plastic mounting tabs and tear the damper pin off the glovebox wall.
- 3Pop off the wood/metallic dash trim bezel & drop the lower glovebox
Grip the passenger wood/metallic dash trim bezel (or use a plastic trim pry tool at the corners) and pull it straight back toward the passenger seat to pop its horizontal metal spring clips loose, setting the bezel aside. Then squeeze both upper side walls of the lower glovebox inward and swing the glovebox down on its hinges.
- 4Unclip both ends of the folding honeycomb filter door
Behind where the trim bezel and glovebox sat, locate the rectangular black honeycomb-grid filter access door on the white/black HVAC plenum. Release the clips at both the left and right ends of the honeycomb door and lift the door out onto the seat.
- 5Slide the old #FP-79 / #CF12150 filter straight out level
Pull the old Motorcraft #FP-79 / FRAM #CF12150 cabin air filter straight out toward you, keeping it level so leaves, pine needles, and job-site dust trapped on its top face do not fall into the blower wheel below.
- 6Point the ↓ AIR FLOW arrow DOWN and slide in the new #FP-79 / #CF12150 filter trap
Check the front edge of your new Motorcraft #FP-79 (OEM FL3Z-19N619-A) or FRAM #CF12150 filter and orient it so the ↓ AIR FLOW arrows point straight DOWN toward the blower fan underneath. Slide the filter in level until its front edge sits flush inside the slot. Avoid this trap: Sliding the #FP-79 / #CF12150 filter in with its AIR FLOW arrow pointing up puts the fine backing layer upstream against incoming dust and leaves, causing premature clogging and weak A/C airflow.
What you need
- Cabin air filter #FP-79 / #CF12150 (FL3Z-19N619-A) · 257 × 204 × 35 mm (fits 2015–2025 F-150, Super Duty & Expedition)
- 7mm socket wrench or 7mm nut driver · required to remove the 2 hex screws under the upper rubber mat
- Plastic trim pry tool · optional, helps pop the passenger dash trim bezel off its spring clips without marring
Questions
What size socket is needed to change a 2015–2025 Ford F-150 cabin air filter?
You need a 7mm socket or 7mm nut driver to remove the two hex washer-head screws hidden underneath the front lip of the rubber mat in the upper dash tray above the glovebox.
What cabin air filter part number fits a 2015–2025 Ford F-150 and F-250/F-350 Super Duty?
All 2015–2025 Ford F-150 (including Raptor and Lightning), 2017–2025 F-250/F-350/F-450 Super Duty, and 2018–2025 Expedition models use Motorcraft #FP-79 (or #FP-92 Odor/Freshener version), Ford OEM FL3Z-19N619-A, FRAM #CF12150, Bosch P3969WS, or Wix WP10266 (257 × 204 × 35 mm).
Which way does the AIR FLOW arrow point on a Ford F-150 cabin air filter?
Point the ↓ AIR FLOW arrow straight DOWN toward the floor. Outside air enters from the cowl below the windshield and is drawn downward through the filter into the blower fan underneath.
Safety
Switch the ignition off before working on the dashboard. Keep a firm grip or magnetic socket on the two 7mm hex screws above the bezel so neither screw rolls forward into the windshield defroster duct.
- Engine off: switch the engine and the fan off and take the key away before you reach behind the dashboard or under the bonnet.
About this guide
3D Spatial Reconstruction: models are engineered from factual measurements to show the parts, the fixings and the order of the job before you start. Always check the handbook of your own car.
This 3D guide models the cabin air filter replacement procedure on the 13th-generation (2015–2020) and 14th-generation (2021–2025) Ford F-150, which shares its aluminum cab and HVAC architecture with the 2017–2025 Ford F-250/F-350/F-450 Super Duty and 2018–2025 Ford Expedition / Lincoln Navigator.
Because the HVAC filter slot sits higher in the truck dash than the lower glovebox opening, accessing the folding honeycomb filter door requires lifting the rubber mat in the upper dash shelf, removing two 7mm hex screws, and pulling the passenger dash trim bezel straight back off its spring clips.
Sources: Ford F-150 Owner’s Manual: Passenger Compartment Air Filter (Motorcraft FP-79 / FL3Z-19N619-A replacement interval every 20,000 miles), FRAM #CF12150 Fresh Breeze Cabin Air Filter Specifications (257 × 204 × 35 mm for 2015–2025 F-150, F-250, F-350, Expedition), Price: Filterbuy cost guide, cabin air filter replacement at a quick-lube or tyre chain, $40–$100 (updated July 2026, read 9 November 2026), Price: RockAuto, Motorcraft FP92 cabin air filter, $17.13 (a part-number search for FP79 returns it; its buyer’s guide lists the 2015–2026 F-150, the 2017–2026 Super Duty and the 2018–2024 Expedition; read 9 November 2026).
The 3D models, drawings and text are our own. The 3D cabin is an unbadged reconstruction of this vehicle’s own layout, from its maker’s procedure and the sources above, not the maker’s own model or a scan. Ford, Lincoln, Motorcraft, F-150, F-250, F-350, Super Duty, Expedition, Navigator, FRAM and Bosch are trademarks of their respective owners, named strictly in text to indicate mechanical compatibility and fastener/part specifications (nominative fair use); iTakeApart is not affiliated with or endorsed by any vehicle manufacturer.