2009–2013 Toyota Corolla Cabin Air Filter Replacement2009–2013 Corolla cabin filter2009–2013 Corolla filter

Steps ↓
✓ Spec-Researched Risk: Low 5–10 min
What you need6 steps · press play

3D Spatial Reconstruction: models are engineered from factual measurements to show the parts, the fixings and the order of the job before you start. Always check the handbook of your own car.

iTakeApart.com is an independent platform creating original 3D teardown and repair instructions. We are not affiliated with, endorsed by, or sponsored by Apple, Samsung, Sony, Nintendo, Microsoft, Valve, Dyson, Nespresso, Meta, Ray-Ban, Oura, Tesla, or any other manufacturer or brand mentioned. All product names and trademarks belong to their owners and are used only to identify the devices a guide is for (nominative fair use). Opening a device may void its warranty; you work on it at your own risk.

Embed this 3D guide

Paste it into an article, a blog post or a forum that allows iframes: your readers get the full 3D player (orbit, steps, X-ray, the part to buy) with a link back to this repair guide.

Preview ↗

Free for press, blogs, repair forums and classrooms. Embed this interactive 3D guide freely on your site or in your article: just keep the "Interactive 3D by iTakeApart.com" credit badge and its link intact. Commercial, OEM or white-label use needs a partner licence (Terms).

Search nearby garages

Opens local search results in Google Maps for your car and a postcode or city. We do not check, rate or recommend the garages it shows.

Open Google Maps directly ↗

What you type goes only into the Google Maps search: we do not keep it or send it anywhere.

Before you open itDIY or a repair shop?
Overall repair riskLow
Time required5–10 min
What can go wrongDropping the glovebox before unhooking the right damper arm, prying the left hook tab on the black cover, or installing the ↑ UP filter upside down.
Cost comparison DIY: a #CF10285 filter, $26.15 listGet the part ↗Get the kit ↗ Quick-lube or tyre chain: $40–$100Search nearby garages ↗Opens local search results in Google Maps US prices, checked October and November 2026; the shop figure is from Filterbuy’s cost guide, and prices vary by shop and country.
Fix vs. Replace

Fix it yourself, pay a repair shop, or replace it?

FaultClogged cabin air filter

Your time is worth
Fix it yourself$29
  • Part$26.15
  • Toolsnone needed
  • Time5–10 min
  • 3D risk levelLow
Repair shop$40–$100

Garage

New or refurbishedUpkeep: nothing to replace
DIY Wins — Save ~$41Buying new does not apply here, so against a shop’s price: doing it yourself costs 58% less, with your time at $25/hr.DIY against a shop: 58% lessFind the partAmazoneBay

How the verdict works: our own rules of thumb, not statistics. DIY wins when the 3D risk is low or medium and doing it yourself saves over 40% against a replacement (against a shop’s price where buying new does not apply). Replace instead when the device is sealed or potted, or the repair costs over 60% of a replacement. Consider a shop when the risk is high, the job needs soldering or it has a delicate ribbon-cable trap. Your time counts at the rate you pick. Figures are estimates in US dollars, read on makers’ and shops’ own pages in October 2026 and November 2026; they vary by shop and country, and the pages are listed with the guide’s sources. The links open a shop search; we earn nothing from them. Compare other devices in the Fix or Replace? calculator →

Measurements in

6 steps · No tools · 2009–2013 Corolla E140/E150 · Part #CF10285 / 87139-02090

2009–2013 Toyota Corolla Cabin Air Filter Replacement: interactive 3D repair guide

✓ Spec-Researched 3D Guide

On the 2009–2013 Toyota Corolla (10th Gen E140/E150, Matrix, 2006–2018 RAV4, and 2007–2017 Camry), changing the cabin air filter (#CF10285 / OEM 87139-02090) takes 5 minutes with zero tools—provided you know three Toyota-specific details: unhooking the right-side shock absorber loop first, lifting the glovebox off its two slotted C-shaped bottom hinges, and hooking the left tab of the black cover before snapping the single right clip shut.

What you need

On the 2009–2013 Toyota Corolla (10th Gen E140/E150, as well as the Toyota Matrix, 2006–2012 RAV4 XA30, and 2007–2017 Camry XV40/XV50), the cabin air filter sits in the white Denso HVAC housing behind the lower passenger glovebox. No tools are needed: the lower glovebox unhooks from its right-side damper arm, squeezes past two upper claws, and lifts completely off two slotted bottom hinges.

Tools: Hands only (no tools)

Exact Platform Fitment & Filter Part Numbers

Compatible Toyota / Lexus / Scion Models Using Filter #CF10285

All vehicles below share this exact Denso behind-the-glovebox filter housing (215 × 194 × 29 mm), right-side shock absorber pin, and ↑ UP cover orientation:

Vehicle & YearsChassis CodeGlovebox & Cover MechanicsExact Part Numbers (FRAM / OEM)Arrow Orientation
Toyota Corolla (2009–2013 model years; not 2008)10th Gen E140 / E150Right damper pin + squeeze sides + 2 slotted bottom C-hinges + left-hook/right-clip coverFRAM #CF10285 · OEM 87139-02090 / 87139-50100↑ UP points UP (actual airflow is downward into the blower)
Toyota Corolla (2014–2019; 2019: check the old filter)11th Gen E170Right damper pin + squeeze sides + left-hook/right-clip black coverFRAM #CF10285 · OEM 87139-50100 / 87139-07020↑ UP points UP
Toyota Matrix (2009–2014) / Pontiac Vibe (2009–2010)2nd Gen E140Identical to 2009–2013 Corolla: detachable slotted bottom hinges + 1-clip coverFRAM #CF10285 · OEM 87139-02090 / 87139-50100 (Matrix)↑ UP points UP
Toyota RAV4 (2006–2018)3rd Gen XA30 & 4th Gen XA40Right damper pin + squeeze sides + left-hook/right-clip coverFRAM #CF10285 · OEM 87139-02090 (to 2012) / 87139-50100 (2009 on) / 87139-07020 (2013 on)↑ UP points UP
Toyota Camry (2007–2017)6th Gen XV40 & 7th Gen XV50Right damper pin + squeeze sides + left-hook/right-clip coverFRAM #CF10285 · OEM 87139-07010 (to 2011) / 87139-50100 (2012 on) / 87139-07020 (2013 on)↑ UP points UP
Toyota Yaris (2007–2018) & Highlander (2008–2019)XP90/XP130 & XU40/XU50Right damper pin + squeeze sides + left-hook/right-clip coverFRAM #CF10285 · OEM 87139-50100 (Yaris: 2008 on)↑ UP points UP

Why Toyota Prints ↑ UP Instead of ↓ AIR FLOW: In 2009–2013 Corolla housings, outside air enters from the windscreen cowl above and is sucked downward by the blower fan below the filter. Toyota OEM and FRAM (#CF10285) filters print ↑ UP to show which side of the tray faces up. If your aftermarket filter prints AIR FLOW instead of UP, point the AIR FLOW arrow DOWN (↓) toward the floor.

Before you open it: the risk map

X-ray view of the 2009–2013 Corolla passenger dash: the right-side shock absorber pin, the two upper stopper claws, the two slotted C-shaped bottom hinges, the black filter door (squeeze clip on the right, hook tab on the left), and the ↑ UP mark.

Critical Toyota E150 latch & hinge zones

Claws, slotted hinges, right clip & ↑ UP mark

Press X-Ray & Danger Zones (K) on the player to see them in 3D, through the closed car.

All 6 steps

  1. 1Open passenger door and empty the lower glovebox

    Switch the ignition and blower fan off. Open the front passenger door wide, press the latch on the lower glovebox (beneath the upper dash compartment lid), and empty the owner’s manual and contents onto the seat so nothing spills when the glovebox detaches off its bottom hinges.

  2. 2Unhook the right-side shock absorber (damper) arm trap

    Look on the right outer wall of the lower glovebox (toward the passenger door) to find the black cylindrical shock absorber (damper) arm. Pinch or push the damper arm’s lower loop outward toward the right door to slip it off the split plastic pin on the side of the glovebox, and let the arm hang free. Avoid this trap: If you squeeze the glovebox sides inward and drop the bin before unhooking the right-side shock absorber, the full weight of the glovebox yanks the damper cylinder past the end of its stroke and shears the split plastic pin right off the glovebox wall. Always unhook the damper loop first.

  3. 3Squeeze both sides in and wiggle off the slotted bottom hinges

    Apply inward pressure to both upper sides of the glovebox near the dashboard to clear the two upper stopper claws. Lower the glovebox down, then wiggle and pull it toward you to unhook its two C-shaped slotted bottom hinges completely off the lower dash hinge shafts, and set the glovebox in the footwell.

  4. 4Press the single right-side tab and unhook the left cover slot

    Locate the black rectangular filter cover door on the white HVAC housing (stamped ↑ UP on its right end). Unlike 2-clip doors, this Toyota cover has a single squeeze tab on the right and a hook tab on the left: pinch the right-side finger tab inward, swing the right end out toward you, and slide the left tab out of its slot.

  5. 5Pull the old filter straight out and note the ↑ UP mark

    Pinch the front edge of the old white-framed filter and slide it straight out of the housing, keeping it level so dry leaves and dust sitting on its top pleats do not drop into the blower fan wheel underneath. Notice the ↑ UP arrow printed on the front edge.

  6. 6Slide the new #CF10285 filter in with ↑ UP pointing up trap

    Check the front edge of your new filter (#CF10285 / OEM 87139-02090): Toyota OEM filters and FRAM CF10285 filters print an ↑ UP arrow indicating the top of the tray. Slide the new filter straight into the slot with the ↑ UP arrow pointing UP and the side pleats resting flat on the housing rails. Avoid this trap: In Toyota housings, the ↑ UP arrow marks the top orientation of the filter frame so its flexible side flaps seal against the upper guide rails. Sliding a Toyota ↑ UP filter in upside down causes the side pleats to buckle and forces incoming air against the fine backing scrim first, cutting vent airflow and clogging the filter early.

What you need

Questions

Which way does the arrow point on a 2009–2013 Toyota Corolla cabin air filter?

Toyota OEM filters, Denso filters, and FRAM #CF10285 filters print ↑ UP on the front edge—install them with the ↑ UP arrow pointing UP, matching the ↑ UP stamp on the black filter cover. However, actual airflow from the blower fan moves DOWNWARD (from top to bottom). If you buy an aftermarket filter whose arrow says AIR FLOW instead of UP, point the AIR FLOW arrow DOWN toward the floor.

What cabin air filter part number fits a 2009–2013 Toyota Corolla?

Model-year 2009–2013 Toyota Corollas (1.8L 2ZR-FE and 2.4L 2AZ-FE) take FRAM #CF10285 (215 × 194 × 29 mm). Toyota’s own numbers for them in two parts catalogs are 87139-02090 and 87139-50100 (which replaces 87139-50060; one catalog lists it only from model year 2011). FRAM’s interchange list also matches #CF10285 to Purolator C35667, Wix 24483 and Toyota’s 87139-07010, 87139-YZZ08 and 87139-YZZ20: the catalogs list 87139-07010 for the 2007–2011 Camry and replace both YZZ numbers with 87139-YZZ82. For a 2008 model-year Corolla, FRAM lists a different filter, #CF10133.

Why won’t the glovebox go back on smoothly after changing the filter?

The bottom of the 2009–2013 Corolla glovebox has two open C-shaped slotted hinge claws. You must hook both bottom C-hinges onto the two horizontal plastic hinge shafts on the lower dash frame BEFORE swinging the glovebox upward past the side stoppers.

How do you open the black cabin filter cover on a 2009–2013 Corolla without breaking it?

Only the right end of the black rectangular cover has a squeeze clip. Press the single right-side finger tab inward, swing the right end out toward you, and slide the left slotted hook tab out of the housing. When putting it back, hook the left tab into its slot first, then snap the right clip shut.

Safety

Switch the ignition and HVAC blower fan completely off and remove the key before reaching behind the glovebox. Never pry near the upper dashboard pad above the upper glovebox—the front passenger airbag module is mounted directly above it.

About this guide

3D Spatial Reconstruction: models are engineered from factual measurements to show the parts, the fixings and the order of the job before you start. Always check the handbook of your own car.

This 3D guide models the exact behind-the-glovebox cabin air filter procedure on the 10th-generation 2009–2013 Toyota Corolla (E140/E150), which is mechanically shared with the 2009–2014 Toyota Matrix, 2006–2018 RAV4 (XA30/XA40), and 2007–2017 Camry (XV40/XV50).

Three physical details distinguish this Toyota design from generic gloveboxes: (1) the lower glovebox lifts completely off two slotted C-shaped bottom hinges once the right-side damper loop and upper side claws are released; (2) the black filter cover door unclips only on the right side while its left end is a slotted hook tab that must be inserted first on reassembly; and (3) both the black cover and OEM/FRAM #CF10285 filters are marked ↑ UP to show the top of the tray, even though the blower fan pulls air downward.

Part numbers checked on 10 November 2026: FRAM lists #CF10285 for the Corolla from model year 2009 to 2019 and a different filter, #CF10133, for 2008; for 2019 it also lists the newer #CF12157, so on a 2019 car check the filter that comes out. Two Toyota parts catalogs (ToyotaPartsDeal and ToyotaPartsNow) list 87139-02090 for the 2009–2013 Corolla, and 87139-50100 as well (one of them only from model year 2011). FRAM’s interchange list also matches #CF10285 to 87139-07010, 87139-YZZ08 and 87139-YZZ20, but those catalogs list 87139-07010 for the 2007–2011 Camry, not the Corolla, and replace both YZZ numbers with 87139-YZZ82.

Sources: Toyota Owners Manual: Air Conditioning Filter Replacement (unhook damper, press in both sides, detach lower hinges, press right cover tab, align ↑ UP mark), FRAM: CF10285 Fresh Breeze cabin air filter, its Applications and Interchange tabs (8.471 × 7.644 × 1.143 in; fits the 2009–2019 Corolla, 2009–2014 Matrix, 2009–2010 Pontiac Vibe, 2006–2018 RAV4, 2007–2017 Camry, 2006–2019 Yaris, 2008–2019 Highlander and 2010–2015 Prius among others; interchanges with Purolator C35667, Wix 24483 and Toyota 87139-02090, 87139-50100, 87139-07020, 87139-07010, 87139-YZZ08 and 87139-YZZ20; read 10 November 2026), FRAM: CF10133 Fresh Breeze cabin air filter, its Applications tab (the 2000–2008 Corolla and 2003–2008 Matrix; FRAM’s parts finder gives CF10133 for a 2008 Corolla 1.8L and CF10285 for a 2009; read 10 November 2026), ToyotaPartsDeal: genuine Toyota cabin air filters for the Corolla (87139-50100, which replaces 87139-50060, for 2009–2019; 87139-02090 for 2009–2013; 87139-07020 for 2013–2019; 88568-02020 for 2003–2008; its Matrix, RAV4, Camry, Yaris and Highlander pages list 87139-50100 too, and 87139-07010 for the 2007–2011 Camry; read 10 November 2026), ToyotaPartsNow: genuine Toyota cabin air filters for the Corolla (87139-02090 for 2009–2013; 87139-50100 for 2011–2019; 87139-07020 for 2014–2019; 88568-02020 for 2003–2008; its Matrix, RAV4, Camry, Yaris and Highlander pages list 87139-50100 too, and 87139-07010 for the 2007–2011 Camry; read 10 November 2026), ToyotaPartsDeal: genuine Toyota 87139-YZZ82 (it replaces 87139-YZZ08 and 87139-YZZ20 among others; listed for the 2007–2011 Camry, 2010–2014 Prius and 2012–2013 Yaris, not the Corolla; read 10 November 2026), Price: FinditParts, FRAM CF10285 list price $26.15 (October 2026), Price: Filterbuy cost guide, cabin air filter replacement at a quick-lube or tyre chain, $40–$100 (updated July 2026, read 9 November 2026).

The 3D models, drawings and text are our own. The 3D cabin is an unbadged reconstruction of this vehicle’s own layout, from its maker’s procedure and the sources above, not the maker’s own model or a scan. Toyota, Corolla, Matrix, RAV4, Camry, Yaris, Highlander, Prius, Lexus, Scion, Pontiac, Vibe, Denso, FRAM, Purolator and Wix are trademarks of their respective owners, named strictly in text to indicate mechanical compatibility and fastener/part specifications (nominative fair use); iTakeApart is not affiliated with or endorsed by any vehicle manufacturer.